Industrial Remote Controls As Transport Leak Detection System

By Author: Andrew Richard
Total Articles: 150
Comment this article

Industrial remote controls are used to control a system or machine without facing the hard effort. Wireless control is a device that runs wirelessly and by using this system one can operate a machine even from a distance. Industrial transport leak detection systems are specifically manufactured for industrial automation. This wireless radio remote control is easy to utilize and install.

At present these are considered for propane, anhydrous ammonia and butane transports. The system is DCE certified to comply with all US DOT and Canadian Transport Canada regulations for ‘Passive Shut Off’. The system makes the whole procedure easy and smooth. This is the reason this is a well accepted machine for all over the world.

These industrial remote controls and systems continually monitor the loading and off-loading procedure while looking for a quick change in discharge pressure. The system detects a separated hose or failed connection of the tank internal valve within 1/2 second. There are some specifications of transport leak detection systems. These are:

• LDS Passive systems that incorporate a functional ...
... ‘Test’ button as a way to determine the unit’s readiness.

• The system is very easy to install and require no calibration or adjustment.

• The procedure will activate automatically by opening the internal valve or pipe guard.

• The option includes multi-pipe or multi-trailer sensors, automatic truck engine or PTO shut-down.

• And the auxiliary control panel is available for LDS100 and LSD200 systems to allow drivers’ side unloading control.

Now there are some models of transport leak detection system that help you to know more about the system.

Model # LDS 60: This is a part of the system. Basically this is a fully automatic leak detection system for propane and anhydrous ammonia transports. This system has been designed & tested by design Certified Engineers to meet the compliance requirements of U.S. Hm225A and Canadian B620 regulations. The low powered control unit continually monitors piping and hose assemblies during the off-loading process.

Model # LDS 100: This is an automatic leak detection system that designed by professional engineers specifically for LPG and Anhydrous Ammonia bulk transfer. Trailer mounted unit continually monitors the off-loading process for “rate of change” parameters signifying broken or damaged hoses, fittings and piping. A leak is instantly detected and stopped by the closure of the tank internal valve(s). The truck’s engine can also be stopped and PTO disengaged if desired.

This system automatically activates at the end of each load. This ensures that the system is fully operational and helps reduce the possibility of a damaged cargo pump due to product run out. This unit also “fails safe” and closes the internal valve with a loss of power or the release of the trailer parking brakes.

BASE Engineering designs excellent industrial remote controls for different engineering and commercial purposes. Since 1996 over 50,000 BASE systems have been employed around the globe to increase job safety and productivity. As a result of this design effort we have the confidence to offer a four year, no hassle, and replacement warranty on every product we manufacture. Wireless radio remote control, in our hand, has moved into the next level.For more information please visit www.baseng.com