How To Drill Holes On Plexiglas

By Author: Emman Sioco
Total Articles: 352
Comment this article

Drilling holes on glass is commonly done for various purposes especially for added functions. In most cases, these are in order to properly secure the material so that it does not move or get dislodged. Although this can be done by any person, skill and experience is required in order to acquire a good result. You would need a steady hand as well as a huge amount of patience in order to get the job done with a nice effect.

Learning how to drill holes on your Plexiglas is quite simple and can be learned by any person who has a desire to excel in this type of task. All you need for this job is a quality power drill, hand gloves, and eye goggles. The rest is up to your patience and skill in holding and manipulating the power tool. Always consider your safety when using any type of tool, especially those that are powered by machines.

Clean Area - make sure that you have prepared the area where you will drill holes by wiping off any dirt in order to ensure that there are no errors in your project. Although this may not be substantial to your job, working on a clean glass is much better than working on a dirty one. ...
... Wouldn't it be more comfortable holding a clean Plexiglas than handling a messy one? Avoid using clothes that has sharp or rough edges as they tend to leave scratches on the surface of the glass.

Prepare Tool - get the power drill ready before you start the task and make sure that it is in good, working condition. Check the wiring to ensure your safety as many people have fallen victims of stripped wire which can be fatal when you get in contact with it.

Mark - use a marker to mark the area where you want to drill holes. Make sure that you have measured the distance of the holes in case you are making more than one. Keep in mind that the mark you have written on the glass would be the basis of your work which is why it is very important to be accurate on where you put it.

Drill - make sure that there are no children playing around or near you when you are drilling holes on your Plexiglas. This is a precautionary measure which is very important if you want to have an accident-free project. Position your power drill where the tip is on top of the mark. Slowly and gently push the drill on the area where you want to create holes. Make sure that you are using the correct drill size in order to get an efficient and effective job. As you work your way through the hole, splash small amounts of water on the hole in order to maintain the temperature of both the glass and the tool. Make sure that you are drilling in a steady motion and position to avoid chipping and breaking the glass material in the process.

I also write about getting the right hot stone massage kit by picking the right basalt stones with the correct density.