Caster Wheels High Temperatures

By Author: Ismi Muftahdina
Total Articles: 1
Comment this article

Industrial castors for high temperatures have made a material that can withstand the high temperatures. The caster wheels are classified as high temperature, where they can function normally at temperatures above 150 ° F (66 ° C). Standard or regular industrial caster wheel when used at temperatures exceeding the provisions may result in damage, the life of the operation in maintaining the short, more or premature failure. Industrial caster wheels high melting temperature widely used in autoclaves, bakery oven, bakery, powder, and smoking or all of the water vapor.
Below is a description of the materials often used to wheel the caster wheel of high temperature caster wheel?
1. Polyurethane wheels. High temperature caster polyurethane wheels normally use less than 180 ° F or 82 ° C application, when used about 180 ° F will weaken polyurethane wheels and should be evaluated properly.
2. Nylon wheels. Up to 250 ° or 121 ° C can tolerate nylon wheels and a sort of decent nylon wheels can withstand intermittent temperatures ...
... up to 400 ° F or 204 ° C. Most people like to use nylon wheel, because with minimal force from rolling nylon wheels.
3. Phenolic wheels. Appropriate materials are fiberglass. You can use these bikes at temperatures up 232 ° F or ° C, but not continuously up to 30 minutes. A 450 on a regular basis, many people use these bikes dry heat applications, such as spray painting cars, vans, cooking autoclaves and dry heat oven. When used for 30 minute more to reduce the duration of the wheels.
4. Cast iron wheels. When you want to use carts for temperatures up to 600 ° F or 315 ° C, select the cast wheel is the right choice. These wheels also have the ability to load, but they can increase wear on the floor.
Don’t forget except wheels, high temperature caster wheels must be having brackets with high temperature. However, the normal wheels of steel or stainless steel to withstand high temperatures, but there are some things to see. Lubricants, part of the swivel bearings need lubricating oil, which applies a high temperature. Lubrication comes with this question, because if you do not grease the loss of power when used to work the lubricant temperature. High temperature lubrication of caster wheels specialized greases and dry film graphite. Lubrication is also the need of a part of the running wheel; they have a high element of life for the wheels.