The Iphone Screen Replacement

By Author: ryanclark1
Total Articles: 2
Comment this article

iPhone is delicate just like any other cell phones or iPads. It easily gets damage when mishandled and so, extra care should be taken to avoid using a lot of money buying another one or repairing. If you have ever been involved is such situation you need to get tips on how to handle and protect your iPhone from either breaking or getting damage. This tips includes how to take care of your iPhone as well as how to perform simple troubleshooting;-
Connect your iPhone to the computer, click on sync and follow the tips given.
And you need to have the tools listed below.
• Narrow flat head screw driver or any other tool that can play its role; this will be used when scraping.
• Get another head screwdriver that has X shape
• Razor blade
• You must have iPhone glass 0screen with you.
• Have the super glue or double-sided tape, which you will use when fixing.
• Rubbing alcohol
If you don’t have any of these you can purchase them online, ’iPhone screen repair kit’
Point to note when doing this is; if you are not comfortable ...
... doing all these you can take it to a proficient iPhone repairer. This is to protect your iPhone from getting more damages.
Look at the bottom of your iPhone and locate the 2 screws on either side of the USB connector to unscrew both of these.
After that, remove your screen using the razor blade or a scapel, put it between the rubber and the metal then lift the screen. Other people use suction cup instead of razor blade or the scrape; this is by placing it above the home button and pulling the screen gently.
Hold the screen and the phone, look for flaps on you right, you will see label 1 and2 on a bright orange sticker and lift these flaps with your razor blade.
Get the third sticker from the second flap and lift the black clamp, once you are through with this, the iPhone screen will be free from the iPhone.
There are five screws on the side rails, three are on one side while the other two are on the on the other side, all these screws have black tape on them and they are all the same. You can cut them using the tape.
Put the razor blade in between the rail and wedge. This is to separate the LCD screen from the glass. The LCD will slide down towards the home button to clear the top flanges, this is to separate the LCD screen from the metal frame.
Make sure you clean the metal from the broken glass. While on this step, you need to be careful because you can deform the frame.
Now you are just about to put another new screen on your iPhone, make sure you cut the tape correct, be careful while using the glue to avoid applying it on the home button.
Put the LCD screen and the glass back, then the six screws you took before
Also, slide the 3 cables into the clamp, and then put the 2 and 1 cable by pressing them on the connector.
Finally put the screen on your iPhone and enjoy using it

If you have a problem with the screen of your iPhone, worry no more about how much money you need to repair it. Put an effort of going through this tips and you will find overwhelming information about iPhone screen replacement and any other information you may need about iPhone.
http://www.fix-iphones.com