A Complete Guideline To Use Gas Airsoft Guns

By Author: Tony Astley
Total Articles: 35
Comment this article

What are the tips that will be handy for all those that are interested in this game? Especially for the beginners, there are some points that need to be taken into consideration while learning the procedure. You have to know how to maintain, troubleshoot and repair the gas guns.

The fundamental steps that should be followed by all are:

• The user manual should be read thoroughly and all the functioning must be memorised before you begin the game.

• All the pistols and guns have different working and functioning characteristic, so never make the mistake of generalising the instructions to all the type of guns.

• The correct method of filling the gas magazines is to do it with the gas inverted. There is a user manual available for filling the pistol as well.

• Know how much gas should you be filling because overload of gas will damage the magazine and may cause leakage.

• With repeated use of the gun, the magazine will turn very cold and it will decrease the power of the gun because the gas would stop expanding in the right manner. Ideally, you need to wait for some minutes so ...
... that you give sufficient time to the magazine for warming up.

Apart from these basic facts and guidelines, what are the dos and don'ts that one should follow while using the guns? Here is a list of some most common dos and don'ts that must be followed strictly by all:

Dos:

• Always have a habit of leaving small amount of gas in the magazine for keeping the O- rings lubricated, if you want the airsoft guns for a longer period of time.

• Keep your gun and magazine clean and well maintained and keep it lubricated every month.

• Use 100% approved silicon spray or oil that you will be using for lubrication.

• Between two shots, let the gun rest so that the magazine gets time to return to its normal functioning temperature.

Don'ts:

• Do not let go of all the gas in the magazine by pressing the valve for release. Always remember to release the gas slowly and gradually.

• Never bang the magazine into the gun. This will lead to the damaging of the magazine lips and the nozzle to break- and this will lead to mis-firing.

• Never keep the magazine full of gas. It will deform the O-rings under high pressure. Only a minimal amount of gas is fine enough.

• Leaving the slide fully retracted for longer time period is not a good idea. It damages the recoil spring.

• Avoid keeping the magazine fully loaded at all times. It leads to damaging of the follower spring.

• Never go for rapid firing. It freezes the O- ring. Always keep a gap of one or two seconds in between the shots.

• Avoid using the airsoft guns gas in the winters. The cold temperature will cause the airsoft guns to function with a decreased efficiency.

A gun that is properly maintained and well kept will not only ensure that the gun will function at its best, but it will also ensure that the gun lasts long.

Resource box:

Your search for the airsoft guns gas should end at J D Airsoft. They provide an excellent collection of airsoft supplies and accessories.