Enrich Your Saw Blade Grinding Knowledge With Four Tips

By Author: Jason Carter
Total Articles: 61
Comment this article

Maybe you have learned some information about TCT circular saw blade grinding, however, I am sure it is not possible for you to learn almost all related information. After reading article below, you would have new understanding on this topic.

Firstly, the clamping piece structure
When talking about the clamping piece structure, in short, it would be more firm, stable and reliable if you want to get good grinding effect. Believe it or not, it is the main part for the grinding quality, no matter which kinds of cutting tools such as saw blade you will grind, the clamping piece structure should not be loosen, even if just a little, otherwise the saw blade grinding deviation would be very serious and it is not easy to be controlled.

Secondly, please not to ignore the teeth extracting structure
No matter what kind of gear grinding machine you will use for grinding and no matter its structure, teeth extracting structure accuracy design should be guaranteed, when adjusting the machine, its indicator would be at the right location, on the other hands, when exiting teeth, it should be more flexible and reliable.

Thirdly, ...
... grinding center
When taking grinding work, the center of saw blade would be the same as its matrix, rather than the center of knife edge, at the same time, it is important to pay attention on its flat surface grinding center, front rake angle center and relief angle center, otherwise it is not possible to have good grinding effect, when grinding its side angle, please pay attention on the saw blade alloy thickness because it should not be changed at random. No matter the thickness of alloy, grinding wheel center should be at the same straight line with welding location, otherwise there would be angular difference, which will affect grinding quality.

Fourthly, feeding speed of grinding tool head
Sometimes you have to admit that the grinding quality of TCT saw blade would be dependent on the grinding tool head feeding speed. As usual, the feeding speed for TCT circular saw blade would be about 0.5 mm per second to 6mm per second, please not to exceed such limits. In other words, in every minute, it should be less than 20 teeth. If such feeding speed is fast, it will lead to serious cutting tool tumor, or sometimes it would be burned, there would be concave-convex condition on its surface, so that not only grinding accuracy can not be guaranteed, but also grinding wheel would be wasted.

When looking for Circular Saw Blade, please not to miss Flostools, which offer top quality circular saw blades products including Wood Saw Blades and Aluminum cutting Saw Blades. Visit us for more information.