Solar Panels For Your Home: Building Your Own Solar Panels

By Author: Deborah Smith
Total Articles: 1449
Comment this article

With solar panels you can certainly get electricity using the solar energy. it may sound very complicated, but the truth is that you can assemble your own solar panel for your home quickly.

Many companies build solar panels for your home and it can be very high-priced. Yet, there are individuals who wanted to build their very own solar panels to save cash and energy.
Solar panels for your home has lots of uses like reducing electric costs up to 50%, as well as generating power to heat interiors, heat water for indoor pools, and generate electricity. After installation, you will no longer pay for your electricity charges but the company will pay you otherwise. Yes, this is a decent means to lessen electric company pollutions and help Mother Nature from being damaged.
To build your own solar panels for your home basically follow these easy instructions:

1. The following are resources used for your solar panels: ½ sq ft per solar panel copper flashing sheets at around $5 per sq ft, metal sheers used for cutting the copper sheets, 2 alligator clip leads, sandpaper/wire brush attached to an electric drill, ...
... micro-ammeter, electric stove, tap water, 2 li clear plastic water bottle and 2 tbsp salt.

2. By means of the metal sheers, cut the copper sheet. Use gloves when doing this for the sharp sides can injure the hands and this will also prevent the body oils and acid from sweating hands getting on the sheet which can result to oxidization. Slice the sheet at more or less few millimeters more than the size of the electric stove burner.

3. Using wire brush or sandpaper, get rid of corrosions/sulphides from the copper sheet by brushing them off. Place the copper sheet on top of the electric stove burner and maximize the heat.

4. Try to observe the colors on the metal as it oxidizes from the heat. As the color turns black, the coating of black cupric oxide develops upon inspection. Make sure to get that covering thick by leaving the copper flashing sheet cooking for one extra hour. After whirling off the stove, keep the sheet on top of the burner to cool off.

5. When the sheets try to cool down, you can also observe the thick black coating starting to flake off. After it fully cooled down, flush the black coat on the copper sheet by means of running water but never try to bend or scrub. Use the pads of your hands to avoid destroying the metal.

6. Leave a huge opening of the 2 liter plastic bottle by cutting the neck off. Cut one more copper sheet with precisely the same size with the previous one. Compellingly get the sheets into the container. In no way let the metal sheets converge.

7. Alligator clips are then attached to both sheets. Attach the new sheet onto the positive station of the micro-ammeter and the heated sheet to the negative terminal.

8. Dissolve the salt into the heated faucet water. Pour the salt solution, make sure that there are still spaces left on top of the water. Place under the sun and observe the ammeter charge go up. Congratulations, you had just construct your own solar panel for your home.

Are you looking for Solar Panels UK, then check out Aqua Protection to see more information and specifications on the range of Solar Panel products and services.