Cable Fire Protection - Cable Coating For Electrical Cables

By Author: Mary
Total Articles: 16
Comment this article

We all are familiar with that occurring of fire incidents very usual things in this technology oriented world. If we take a look inside of the industrial area then availability of cables are general; however, fireproofing of these cables are awfully vital. There are many sources who are expert to offer you the Cable Coating Installers, KBS Coating Installer, Cable fire protection, KBS Coating, etc. Here we will discuss about the cable coating for electrical cables.

Usually, electrical cables are insulated with Polyvinyl Chloride that contributes to a rapid spread of fire. At the time of passionate fire it gives off lethal fumes ignition and corrosive gases. Moreover, 1 kg of soft PVC with 35% Chloride content when concerned in fire, produces 360 gms of Hydrogen Chloride gas, which is when dissolved in water vapours, results in 1 ltrs of smoking Hydrochloric acid. The propagation of fire in PVC cables is as fast as 20 mtrs per minutes.

The cable coating compound has been developed by AROMA. This compound is water based fire resistant ...
... compound for coating on electric cables to survive severe fire as well as to avert circulation along horizontal and vertical cable racks under intense fire conditions.

Silent features of cable coating for electrical cables:
- Stops propagation of fire along horizontal as well as vertical directions for a period exceeding 3 hours.
- Protects cables from indemnity caused by internal short circuit fires.
- Keeps cable protected for 20 minutes even during intense fire conditions.
- Does not affect the current carrying capacity of the cables.
- Let the cable to withstand sufficient load such as foot traffic.

Why to use Cable Coating?
- Preventing fire damage to the cables.
- To protect functioning of cables and increasing their resistance to fire / heat.
- Preventing the flame propagation through cables runs.
- Isolates cable runs into compartments with a view to localizing the fire.

Generally, it is recommended that cables near boilers where the temperature continuously remains above 50 deg; C. and are prone to Flame Licking, should be coated entirely. So, with sum above all you can easily come to know that how much cable coating is essential.