Ansi B16.5 Flange Manufacturer

By Author: Karan
Total Articles: 715
Comment this article

Akai Metal has distinguished ASME B16.5 Flange manufacturers in India. We have more years of experience in supplying ASME B16.5 Class 150 Flanges are stocked or available in the following range of sizes and materials for the petrochemical, oil, gas and allied industries. ANSI B16.5 Class 300 flanges manufacturers can be assembled and disassembled easily with Pipes. ASME B16.5 standard covers size NPS ½” to 24” Pipe Flanges and Flanged Fittings.

Standard Specification for ANSI B16 5 Flange
Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Size : 1/2″ (15 NB) to 48″ (1200NB)
Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673
BS : BS4504 , BS4504, BS1560, BS10
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

About ANSI B 16.5 Flange
ANSI B16.5 ...
... is limited to flanges and flanged made from cast or forged materials, and blind flanges and certain reducing flanges made from cast, forged, or plate materials. Also included in this Standard are requirements and recommendations regarding flange bolting, flange gaskets, and flange joints. ANSI B16.5 standard covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.Each specification further delineates flanges into pressure classes: 150, 300, 400, 600, 900, 1500 and 2500 for B16.5

ANSI Flange Pressure Ratings
Pressure rating is defined as the maximum allowed pressure that a flange can withstand at increasing temperatures. According to the ANSI/ASME B16.5 specification, there are seven flange pressure ratings: 150, 300, 400, 600, 900, 1500, and 2500.
The term pressure rating is often referred to as "class" i.e. a class 150 flange. Even this is often abbreviated by the use of either "#", "Lb" or “"Lbs" all of which are pronounced pounds and are interchangeable, i.e. they all refer to the same exact concept of pressure/temperature performance of a flange.
In practice this means that if two flanges have the same bore size (say 8 inches), are made from the same material (say A105), but have different pressure ratings (one flange is class 150, the other 300), the lower rated flange (the 150lb one) will be smaller, lighter, and less robust than the higher rated flange (300lb one).

Visit: https://akaimetal.com/ansi-b16.5-flange/