3 Important Reasons For Installing Miniature Circuit Breakers In Your Home

By Author: Nanshi Pacheco
Total Articles: 6
Comment this article

MCB or miniature circuit breakers are a must have for every home. These are automatically operated electrical switches that helps protect your home appliances and your family from electrical faults and shocks respectively. There are many ways these units make your home a safer place, especially compared to the traditional fuse. The main advantages of the MCB are as following.

1. Higher Sensitivity
The mcb circuit breaker is much more sensitive to current than the old fuse. It will detect any abnormal changes in the flow of current and will automatically switch off the circuit. The MCB can do this with much more accuracy and reliability than the traditional fuse. It can detect faults or overloads and cut off electricity. It has much higher sensitivity compared to the fuse. Using the fuse can be much less reliable.
Another advantage of using the MCB is that it allows you to identify the zone or room in which there has been a fault or short circuit. The fuse can never help you determine where the fault has been. Once the fuse wire is burnt, you will have to locate the cause of the fault in the entire building ...
... before fixing the fuse again.

2. Easier Resumption
When you use a mccb circuit breaker, it is easy to resume the supply. All that is needed is to switch the knob back on. If the fuse wire blows, it will be required to replace the entire fuse wire again. This is a time consuming process. You will have to take the complete handle out to fix the fuse. The MCB has a simple interface and you can easily switch the knob back on.
Besides, you will not be able to rewire or replace the fuse unless you have detected where the problem is located. This means more delay because you will first have to locate what caused the problem. If you have an MCB in your home, the supply can be restored quickly by quickly identifying the cause and fixing it.

3. Safety
It is also much safer to handle the mcb electrical board than the fuse. Removing and fixing the fuse requires touching the wire. Although this is done after disconnecting from the supply, there is always the risk of touch the wire while fixing the fuse back on. In the case of the MCB, all that is required is to switch on the plastic knob. There is no need to bother with the wire. Besides, the fuse has to be replaced every time and this increases the cost of maintenance.

Using a mccb circuit breaker is much more reasonable and safer than relying on the traditional fuse. The contemporary low voltage electrical supply further makes it difficult for fuses to protect your appliances and circuit against damage by overload or other problems. This means MCBs also provide a level of protection for your home appliances. Thus, there are many advantages of installing an MCB in your home or even in your office. Make sure to choose the right system based on the number of appliances and rooms in the building.