Understanding The Vital Points Of The Mechanism Of The Automatic Transfer Switch

By Author: Blades power generation
Total Articles: 22
Comment this article

Utility companies and business environment require uninterrupted supply of power. However, the main power supply might be broken due to a variety of different reasons:

• Power supply shortage
• Fault in the power grid
• Fault in some areas of your company’s power circuits

Whatever the cause, you have to be prepared for power break scenarios with an alternate power supply that can support the uninterrupted production of your business.

While generators are apt to support business power connection, it is important to outfit your company with the appropriate amp of generator device. You also need to implement more than one device for different circuits if your company has many different power circuits operating at the same time to fuel your business process. Many data centers, production houses, hospitals, prisons and financial trading centers fall in the category of major power consumers for business processes. You need to have the right kind of changeover switch to ensure that the switch from the main power supply to the alternate power supply is seamless, instant, and powerful. The changeover ...
... is triggered by particular switches, which can be manually operated or automatically triggered. While the manual switches are excellent options for residential areas, in a company culture, you need to invest in an Automatic Transfer Switch to ensure a seamless protocol of power changeovers.

Built in sensor for voltage and frequency dips

The control panel powering the automatic changeover switches has built in sensors, which are triggered by any sudden dips in the frequency or voltage below the optimum set mark required for proper functioning of the building. One of the main functions of the switch is to prepare the generator backup to switch on to handle the power supply when the main power fails due to any reason. The sensor is the first line of mechanism that allows for the automatic changeover with this switch feature.Know more information: http://www.bladespowergeneration.co.uk/

Automatic time delay during switch over

The time delay mechanism of the automatic transfer switches is an imperative feature, which rules the choice of the switches. Both at the beginning and the end of the changeovers, the mechanism needs a certain time delay to protect your overall electric system. During the beginning of the changeovers a slight delay of about 0-5 seconds help the system to adjust to the power shortage and detect if it is a false alarm due to temporary power fluctuations. This stops the generator from taking the load transfer of the entire power supply at every false alarm situation.
Again, there is a delay of 1-30 minutes at the end of the generator sessions. Here, the entire circuit needs to normalize and the shift from alternative to main power supply needs to be gradual to make sure there are no damages due to sudden power surges. The automatic transfer switches maintain these time delays to protect your entire power supply system.