Iphone Screen Repair: Get Your Iphone 4 Repaired

By Author: wirelesswarehouse
Total Articles: 12
Comment this article

It is easy for your phone's screen to get damaged. Its glasslike material makes it highly vulnerable to all types of sharp objects. Due to this, a number of innovations have been developed to help provide protection for every type of phone on the market today. However, even with a screen protector, there are still chances of your device screen being cracked.


Repairs on phone screens are easily accessible though. There are many companies offering this service. However, one can also do it in a DIY manner. It might seem really hard to do an iPhone 4 screen repair, but an in-depth research into the process can make it easier.


One can even choose between LCD and touch panel replacement screens. There are also numerous DIY tips available on the internet for those who wish to save a couple of bucks on having their iPhone 4 repaired.


Disassemble the entire phone


To start off with iPhone Screen Repair Toronto , the entire phone has to be disassembled. While you do this, it is vital to take measures ...
... to make sure that all the pieces, especially the screws, do not end up getting lost. One should also ensure that there is enough time available for the repair to be done since it can take some time before it gets done. One can have small pieces of paper for labeling the different parts of the phone to ensure one part does not end up being mistaken for the other. If possible, have a container ready at hand in case of emergency where the process needs to be stopped.


Remove the SIM tray


All you need to do is insert a paperclip in the hole at the top side of the phone right next to its power button. After the clip is inserted, the SIM tray ejects automatically. The plastic back of the phone can be removed using the case opener. Once this is done, the iPhone antenna cable is removed by carefully prying it loose. It is secured in place with three glue spots and one should do this step with utmost caution. The 10 screws attached around the phone's sides should then be removed as well as the 3 screws that secure the motherboard. The battery and the motherboard are removed together, and the remaining frame is then detached.


Replace the LCD screen


The damaged LCD screen is then removed and replaced by the new one. This should be done with utmost care by loosening the 3 clips on the screen's side and removing the LCD. When the new screen has been replaced, one can proceed to retrace the steps taken before actually placing the screen to make sure that the iPhone gets back to its original assembled state.


If one cannot do a DIY iPhone screen repair in Toronto, there is always an option to approach a service center to do the job. Someone who ends up with a damaged phone can easily check out what a service center has to offer by searching online.