Instructions For Proper Roof Window Installation

By Author: Skylightrepair
Total Articles: 6
Comment this article

Installing a roof window is certainly not as difficult as most people believe. Roof windows are an easy, affordable way to provide you extra light in the unused loft space of your home. Whether you want a loft conversion, or your loft is just used for storage, a loft window will be a great advantage. Roof windows and skylights allow natural daylight and ventilation into a roof space while reducing heat loss and noise transmittance.

Many roofing companies offer skylights or roofing products that comes with fully detailed fixing instructions, have easy to operate handles, adjustable ventilators in the frame, which allow for ventilation in the latched position. However, full instructions come with each window, but some advance details may also help with the skylights and roof window installation in Toronto. Roof windows come in standard sizes which are designed to fit with the least amount of removal of existing roof structure although, of course some is required.

How To Install Roof Windows?

Firstly, you need to determine the position of the window in your roof. You must always follow ...
... Building Regulations and Planning Permission laws and if you are in any doubt, contact the building control department of your local council.

In a full loft conversion for habitable use you will want to install at least one window in each space created in order to provide minimum space for 0.33 square metres of slope opening.

If the roof window installation in Toronto is only used for occasional storage then the window may be installed in any sensible location provided that you ensure that the roof support structure - rafters, purlins and struts is not attenuated in any way.

The opening should be prepared by removing tiles or slates from the area. These can be accessed by cutting away some felt from underneath. This will enable you to slide that tile, and then the other tiles, into the roof space. Once enough tiles are removed, you will be able to cut away the necessary roof timbers to form the correct sized opening.

The opening sash is removed from the new window and the remaining frame is fitted into the new opening using fixing brackets supplied. The tiles or slates are then laid back into position up to the sides of the new window frame. It is unlikely that they will all go back without at least some having to be cut up against the frame so use an angle grinder to cut them. Do not try to cut them in position on the roof, mark, remove them to the ground and cut them there. Always wear safety goggles when using an angle grinder.

The skylight is installed in exactly the same way and can be used for the same reasons as a roof window. Don't fancy doing this project yourself. Hire a professional skylight contractor to ensure that your work is only done by reliable and trustworthy tradesmen.