Cork Flooring Solutions For Commercial And Residential Purposes

By Author: Vikram kumar
Total Articles: 9652
Comment this article

Many people are the individuals who cannot cut the line between residential and commercialcork flooringgrades. Hence, they tend to mix up the two to the extreme that they use commercial standards in their homes, and the reverse is also true! Well, let us take a look at the variations between the two before we can try to make a choice for the kind of installation that could be best for both viable and uptown needs.

Variations between commercial and residential cork floors

The major difference between industrial and inhabited floorings lies in the criteria of finishing the installation of your cork floor! This holds true as far as you totally rely on cork rather than bulletin boards for flooring. For example, to finish theflooringon commercial surfaces, you should apply a top-sealer cover on the cork. Note that this finish is unique to cork floors. This ensures that the surface is flexible yet strong enough to accommodate the heating variations that are so common in cork.

Usually, each mode of flooring has its unique finishing style. Therefore, you should liaise with your manufacturer to find the ideal finish ...
... for yourflooring. Additionally, the finish should correspond to either commercial or residential purposes. Even so, there is no specific finish for a particularfloortexture.For instance, you can use vinyl layer, UV-cured layer or coats of polyurethane to finish cork floorings.

Reasons for opting for floating floors in favor of glue-down flooring

The choice of the type offlooringthat is suitable for any room in your house or office is dependent on the state of their subfloors. For example, it is absurd to install floating floors on surfaces that are often used for cleaning purposes such as baths and kitchens. This is because they are structured with fiberboard centers that are likely to swell when some amount of water seep into them via the seams. Consequently, you will have to opt for glue-down surfaces for such rooms.

Also, glue-down tiles demand that the current condition of your subfloor is just perfect. It must be flat without void and bumps. Fortunately, on a cementedfloor, you will simply add a thin layer of the same to level the surface and by morning, it will be dry enough for you to proceed with the modifications. Even so, floating surfaces tends to be more forgiving because you can install them on moderately bumpy and void surfaces. You can also use them over glued tiles like vinyl, ceramic and linoleum types. Whereas glue-down floorboards are 3/16” the other is 7/16” thick!

You might be seduced to opt for floating bases because they are free of beveled edges that are not always so attractive. Normally, they are not stuck on the subfloor hence; the entire base can expand and contract comfortably tiles peaking over the neighboring ones. Therefore, this designing allows the floating bases to be in contact with the wall.

Since it is evident that floating floors are perfect for both commercial and residential constructions, gain the confidence to give it a try in any of your rooms. You can research on the multiple search engines about the best cork floor styles for better results. Better still, cork flooring experts are ready to help you out!