Types Of Wooden Flooring In Northumberland And Sunderland

By Author: Kevin Elliott
Total Articles: 15
Comment this article

Solid Hardwood flooring

Solid wood flooring is milled from a single piece of timber that is air dried before sawing. Depending on the floor look, timber is cut in three ways namely flat sawn, quarter sawn and rift sawn. The timber is cut to the dimension desired. It is then packed unfinished for installation. Moisture content is then carefully controlled to ensure that the product does not warp during transportation and storage. A floor that is composed of short strips or blocks of wood forming a pattern with inlays of other woods or other materials.

There are number of features for solid wood floors. It comes out with the grooves cut into the back of the wood that runs the length of each plank, which is called as "absorption strips". They are intended to reduce cupping. Solid wood floors are manufactured with 0.75 thicknesses and a tongue and groove for installation.

Other wood manufacturing styles

Rotary peel

This process involves the boiling of the log in water at a certain temperature for a certain amount of time. After that process, wood is peeled by a blade from the outside the log towards ...
... the centre which helps in creating a wood veneer. The veneer is then pressed flat at high pressure. This style has a problem with wood cupping or wood curling. Rotary peeled hardwoods have a plywood appearance.

Sliced peel

This process begins with the same process involved in rotary peel method. Under this method wood is sliced from the log in the same manner that lumber is sawn from a log. The veneers go through the same manufacturing process as rotary peeled veneers. Planks tend to have the edge splintering and cracking as veneers are submersed in water and pressed flat

Dry solid sawn

In this method, hardwood logs are kept at a low humidity level and they are dried slowly to draw moisture from the wood cells. Logs are then sawed in the same manner used in solid hardwood method. This style has the same look as that of solid hardwood, as the product is not exposed to moisture

Engineered wood flooring

Engineered wood in Sunderland flooring is composed of two layers of wood which helps in increasing stability. There are different types of engineered wood flooring. They are;

-> Timber wood floors

-> Veneer floors

-> Acrylic Impregnated wood flooring

-> Laminate and Vinyl floors

Timber wood flooring

The floors in Newcastle and other places are made from sawn wood. This is the most common type of engineered wood flooring. They do not use composite wood, plastic or rotary peeled veneer in their construction

Veneer floors

In this method a thin layer of wood that is commonly a composite wood product is used

Acrylic impregnated wood flooring

In this method, wood is impregnated with liquid acrylic using a proprietary process

Laminate and Vinyl floors

Laminate and Vinyl floors are often confused with engineered wooden floors. Laminate wooden floors use an image of wood on its surface whereas, vinyl flooring uses plastic which looks like wood

Installation system

Wooden flooring Northumberland are generally installed by Tongue and Groove installation system.

Resource Box:

Wooden floorings have been in vogue since olden days. When you want to choose a company for Floor sanding Newcastle make sure you check all the details about their experience, quality and the types of materials they use for the process. Do a thorough research and get the quality and assurance for your investment.