Brief Introduction About Artificial Sand Making Machine

By Author: penoyzhcn
Total Articles: 1
Comment this article

1、Sand making machine is suitable for the soft or hard and extremely hard materials in the crushing, sand making machine is widely used in large, smelting, building material, highway, railway, water conservancy and chemical industry, and many other sectors.

2、The Working Principle of Sand Making Machine:

Material from the hopper into the sand making machine, the distributor will material is divided into two parts, part from the distributor in the middle to high speed rotating impeller, the impeller was accelerated rapidly, its acceleration can be up to several hundred times the gravitational acceleration, and then at the speed of 60-70 m/s from three uniform mass ejection of the flow passage of impeller to go out, first with received by distributor around the drop impact crushing part of the material, and then hit with vortex cavity lining material and be lining material rebound, oblique upward shocks to the top of the vortex chamber, and change the direction of movement, deflecting downward movement, emitted from the impeller passage of material to form a ...
... continuous material.Such a piece of the material in the vortex broken cavity by twice that many risk impact, friction and grinding crushing effect.Be broken material by bottom discharging mouth eduction.Under the crushing process, the material to impact between broken, not direct contact with metal components, but the lining with material shattered by shock, friction, Angle of reducing the pollution, prolong mechanical wear.Vortex chamber internal clever airflow from circulation, eliminate the dust pollution.

And the final material can be discharged from the discharging opening, and the last step is to experience the process of screening and washing by the other crusher machine, whose product size is controlled by the screening equipment.Feed material into the feed hopper, the center hole into the high-speed rotation of the rotor was full speed and the emission mouth out, first with the rebound after free fall impact part of the material, then hit together around the whirlpool of vortex chamber of on line (or back), bounced into the crushing chamber at the top of the first, after the deflection downward movement, and the material impact emitted from the impeller passage to form a continuous material curtain, finally through the lower part of discharging mouth eduction.

3、Performance Characteristics
(1) simple structure, low cost.
(2) high efficiency and energy saving, high crushing efficiency.
(3) with functions of finely, coarse grinding.
(4) through the broken material capability is strong, small affected by material moisture, moisture content of 8%.
(5) can be broken hard, hard material (such as corundum, sintered aluminium vanadium and soil, etc.).
(6) the product is cube, small iron contamination.