Different Styles Of Sandblasting Based On The Types Of Sandblaster

By Author: Brian Wilson
Total Articles: 13
Comment this article

Sandblasting is the procedure used in blasting of small particles on larger surface for specific purpose. The smaller particles are accelerated to very high velocity and are projected on the surface either for cleaning, etching or to remove foreign particles like paint, rust etc. There are different techniques that are developed in the process of sandblasting and the technique solely depends on the type of sandblaster used. A normal blaster usually consists of a pot, a compressor and a nozzle.

1. Pot: It is called as the storage bucket of the blaster and is used to store the mixture which is to be blasted on the surface. The material can be sand, tiny steel balls, tiny walnut shells, copper fags, coconut shells etc. The materials that are to be chosen on the basis of the surface on which it is to be projected.
2. The Compressor: It is the important part of the sandblaster. It is used to regulate the pressure of projection of the particles onto the surface. Regulating the pressure should be done on the basis of ongoing task. Pressure should be different for cleaning and etching purposes.
3. The nozzle: It ...
... is connected to the pot of the blaster and is used to guide the materials onto the surface. The nozzle will be projecting highly accelerated particles so it should be properly handled to avoid any kind of hazards.

There are different tasks that are done using a sandblaster like:

• Cleaning of surfaces.
• Removal of rust
• Surface etching
• Creating graffiti
• Removal of metal deposits.
• Removing paint, oil grease and other foreign deposits.
• Re-texturing a surface

Sandblasting is the best method that you can do to remove paint. As with time the paint and the designs become archaic and are required to be removed for re-texturing. The process of sandblasting should be done under the guidance of an expert. The best way to get it done is to hire a professional. Unless you are aware about the precautions to be taken during the process, expert consideration will always be beneficiary. There are several reports of air borne lungs diseases which have occurred because of the inhalation of the tiny particles. The sand used as propellant is the major cause of the air borne ailments. Other materials like tiny steel and copper balls are projected with very high velocity and are dangerous to exposed skin.

So, it is better to hire a professional to remove paint from your surfaces and making it fit for revamping. The choice of using different type of sandblaster should be left on the professionals as they can make use of the device in a better and safer way. Your job is to hire the required professional on the basis of their past experiences. These professional will assist you in taking the necessary precautions. Hiring an inexperienced person for the job can end your work in vain. It even enhances the risk of hazards that can occur due to the unprofessional use of the blaster.

Brian Wilson explains the process of sandblasting that normally involves firing one of several kinds of sand, shot, bead or grit continuously at the surface of a material by a sandblaster. He recommends the services of Steadblast.co.uk that can help you remove paint in a cost-effective way and serves all parts of the UK. Contact the company now!