Decanter Centrifuge - Perfect For Your Business

By Author: davina
Total Articles: 1
Comment this article

CAD drawing
Mixing hopper, as one of the main components of the device, we provide 2 kinds of dimensions for option:Φ500（500mm×500mm）and Φ600（600mm×600mm）.
Specific structure as shown:
Mixing hopper works by using the Venturi throry. The principle of the venturi effect is the barrier when the wind blows, the barrier on the leeward side port near the surface pressure is relatively low, resulting in adsorption and cause the air flow. Venturi principle is very simple, just to make the air from coarse to fine, in order to accelerate the gas flow rate, the gas outlet at the rear side of the venturi tube to form a "vacuum" area. When the vacuum zone close to the workpiece, there will be certain adsorption.
Chapter 3- Installation and Use
In the drilling mud system, aggravating hopper and centrifugal pump could be connected by a single base, or they can be divided mounted, and then connected each other via manifold and valve.
Two kinds installation
In order to make the whole system more compact, mixing hopper and pump would be installed on the mud tank ...
... skid usually. There is two cases.
Hopper on tank top, pump and manifold on tank skid.
Solids control america is the author or this article on decanter centrifuge .More about information, about shale shaker click here. http://www. gnsolidsamerica.com/decanter-centrifuge.html http://www.gnsolidsamerica.com/decanter-centrifuge.html