It’s Easy To Set Up Your Very Own Cisco Ccna Lab With Little Fuss

By Author: Andy Stopach
Total Articles: 3
Comment this article

To prepare for your exams for CCNA, you need to do effective lab work at home and get ready for your exams with a lot of practice on it. Now it is possible to have this setup real easy because of the various Cisco routers and switches having become more affordable and available in plenty. The market today is filled with a huge number of models and it can become a difficult task of choosing which one to acquire for the future CCNA or CCNP. The main question is which router to buy and what is best to avoid.

A Cisco ccna lab can be setup with any of the Cisco routers available to do just that. Of course knowing which equipment is best suited for what kind of setup is a matter of knowledge but does allow the learning process. It is a good idea to plan on how to set up your own home Cisco ccna lab with the kind of routers available at hand. To aid in setting up your own Cisco ccna lab have the knowledge of equipment required to set up real easy.
One of the most effective routers to enable you to set up your Cisco ccna lab is the 2520 and these routers come with four serial ports, ...
... one BRI interface for ISDN practice, One Ethernet port. This enables the Cisco ccna lab system with the unique capability that while you are using the router for Ethernet and BRI routing you can definitely use the frame relay switch. One can certainly use a lab router as a frame relay switch and a practice router without any problems whatsoever. It is possible to find this range of router for around $100 to $150 approximately and is exceptional value for money and worthy of the practice you can get with your Cisco ccna lab.

Many use 2501s for their Cisco ccna lab because they have fewer interfaces, but the combination of a serial interface and one Ethernet gives scope for a lot of practice. Additionally one can also use three 2520s, one for the dedicated frame relay switch, one as the R1 and the other as R2.but adding just another R3 and its is possible to have a frame cloud connecting R1,R2 & R3. A simple combination such as this will provide you very good practice for your exams. Once your exams are over, if you so deem fit, you can sell your Cisco ccna lab. Now that is a very useful thing, imagine, getting work out of it and then making some money from it too.

Look at the many sites on the internet and it is not hard to find a good bargain and it’s quite possible you’ll find 2501s at a very cheap rate online. In fact you can buy three 2520s and a 2501 for under $500 very easily online and you can always recover the money later by selling. So we know now how easy it is to set up your very own Cisco ccna lab and the set up is not complicated at all. A little planning is all it takes to make best use of simple routers effectively.

For more information about Cisco ccna lab kindly visit