What Happens When A Dryer Won’t Work At All?

By Author: Bruce Swane
Total Articles: 16
Comment this article

Appliances are expensive and we know they are built to last, especially dryers. They have to be because as they get used so often, especially in a busy household with lots of clothes washing each week.
On occasion, a faulty dryer model will reveal its weakness to the owner. Typically this will likely happen right after the warranty expires! If this is the case with you, most likely you will probably have to search online for dryer appliance replacement parts. But before you do that, try to see if you can figure out the problem yourself, and get the part you need for replacement.

Below are some hypothetical questions and answers around a broken dryer appliance.

Q: My dryer seems to be low on actual heat. A normal dryer cycle (40-50 mins for an average wet load) is not dry at the cycle finish. Often, I have to run the dryer several times for one load. What’s wrong?

A: There are a number of possible solutions to this common dryer problem. The first thing a homeowner can do is check the lint screens for lint buildup. If there is a lot of lint there, it may be blocking air used to dry the clothes. So ...
... check that for any air blocking. Also, check that the seals on the dryer door are not worn out. You could be losing a lot of air and energy savings through faulty seals.

Next, check the vent in back of the dryer. To do this, you’ll have to pull the dryer away from the wall and un-attach the vent from the dryer. Now, try drying a normal load in this manner. If the clothes dry better this way, then you’ve pinpointed a possible solution. That is, the dryer vent in back could be blocked somehow. Check online for an appliance replacement part.

Q: What happens when my dryer moves through a cycle, but does not produce any heat? What is preventing the heating elements from working?

A: Check with your appliance replacements parts dealer for this one. Electrical issue like non-heat could mean that it might be the dryer’s heating element at fault; a possible burned out wire; a blown thermostat or even blown fuses at the house. Like an air conditioner, sometimes parts just fail. For the dryer, it could be a blown motor heating switch that’s the root cause. Again, check with an appliance parts repair expert.

Q: My laundry washer works, but the dryer is non-working. How can I check for a blown part?

A: Among the common problems with dead dryers could include a broken belt on a particular model; an inoperative door switch, or a burned out house fuse or tripped circuit breaker. If you have a neighbor with electrical testing tools, ask him to try a spot check around your dryer for any indications where the problem might lay.

To sum up – if your dryer does not work as intended, check the motor, the start switch, the door seals, the thermal fuses, or any broken belts or belt switch. If the self-diagnostic test doesn’t pan out, call an expert team at a reputable dealership for replacement parts for household appliances.

Article Source: Appliance Parts Company