Importance Of Aircraft Maintenance For Fuel Tank Safety

By Author: parveen seoindia
Total Articles: 5
Comment this article

Aircraft maintenance is an important part of aviation sector, every candidate is being trained during the period of Degree/course from any reputed Aircraft Maintenance Engineering College. There is field of fuel tank safety, everyone know without fuel a aircraft can't fly/work in anyway so it has foremost role in aviation field. Before flying of any machine it should be properly inspected from aircraft mechanics. Aircrafts inspection include through investigation of the aircraft. Any Tank must be completely checked for various discrepancies such as:

Fuel leakage
Fuel quantity probe replacement
Fuel boost pump obstructions
Faulty wiring
F.O.D.
Structural damage to wings (cracks and corrosion)
Sealant deterioration
For checking up properly, Aircraft Mechanical Engineer must phisically crawl inside of the tank, if possible. Every tank is not in standard size for average height man to maneuver within easily.
For example, the largest fuel tank is find as DC-9 measures approximately 2-1/2 feet high, 4-1/2 feet wide and 4-1/2 feet long ...
... that is smaller than many corporate aircraft.

Because of the hazards of working in such confined spaces, some guidlines are teach to technicians that are required to perform tank repair as part of their daily duties.

I want to alert every student of Aircrafts Mechanical Engineering that keep concentration on every part of study during their course because any single mistake at the time performance of duty on aircraft can create dangerous situation to many persons. It is true that maintenance technicians have to face different type of dangers at time of performing fuel systems inspections and repairs
Furthermore, jet fuel and other chemicals can be affected to the central nervous system of engine as it is contain toxins or irritants types of chemicals.

To protect technicians from any types of hazards, special training is provided by the mechanical department to their aircraft machenical staff. Every crue staff member must follow proper procedures of maintenance.

Guidlines
Some steps must be performed befor enter an tank. These steps are given:
To Electrically ground and defuel the aircraft
To Gather and stand by with properly functioning fire protection equipment
To Deactivate associated aircraft systems as required
To Ensure proper ventilation, by applying the proven recommended ventilation techniques
To Frequently monitoring the air quality within the tanks

A device of gas detectors can be used to monitor the oxygen and flammable vapor concentrations within the tanks. Oxygen concentrations should be there of 19.5 to 23.5 percent. If there is the level below 19.5 percent it means to oxygen deficient. In case its levels above 23.5 percent then significantly increase the risk of fire and/or explosion.

Proper training is an important part of aircraft maintenance and it must be conducted without an incident. So, training should be taken from Best aviation college that will be helpful in conducting of duty without any hazard. A Aircraft technicians must have accurate voice communication and he should continuously monitor the aircraft fuel tanks.

Emergency Response Plan
The unexpected aircraft fuel system situation is that potentially severe issues can occur. The interior of a fuel tank can create hazardous environment. Therefore, all aircraft service and maintenance procedures should also include an emergency response plan.

We can't 100% ensure about the accident but we can safe with proper maintenance of machine. Appropriate trained candidate can protect from any critical situation. A trained candidate from the best Aircraft Maintenance Engineering College may have good knowledge to face any kind of critical situation in aircraft machine.