Wave Spring Mechanical Seals Manufacturer

By Author: pankaj varma
Total Articles: 2
Comment this article

Mechanical seals are used for the sealing of rotating shafts against stationary housings, as in pumps, multiport swivels and agitators. The assembly of a mechanical seal is based on two main components: one “rotating” part and one “stationary” part.

Mechanical Seals having special Wave or Disc Spring which works well on contaminated liquids, hence preferred on Multi spring design . Such Seals are compact, robust & bi-directional to Use in clear as well as contaminated liquids. wave spring to handle abrasive, slurries, Sludes, sewage and viscous fluid. Major advantage of this seal is that it is compact,axial length but no sticking or clogging.

The design features of crest-to-crest wave spring which reduces the risk of corrosion and fracture can be experienced with this Seal. Compact in design, these Wave Seals can be utilized in smaller stuffing boxes.

Spring seals suitable for most general application. Major advantage of these seals is due to use of single wave spring. It is of compact design with reduced axial length. These seals can also be used in dirty application as spring clogging does ...
... not occur. Torque transmission from retainer shell to seal ring is through drive pin.

The mechanical (or pump seal) is one of the most effective ways of sealing rotating shafts. They usually consist of two lapped faces arranged perpendicular to the axis of the rotating shaft . One face is fixed to the equipment casing or vessel, while the other is fixed to the shaft and so rotates with it.

Major advantage of this seal is compact in design with reduce axial length.

The shaft is sealed by secondary sealing elements like Orings and the seal faces are statically sealed against the housing. The introduction of the pumped medium into the minimal sealing gap generates a lubricating film resulting in the desired sealing effect.

Using wave springs also eliminates the need to drill additional holes into the periphery of the seal housing needed to provide enough axial space for coil springs; they will also save radial space compared to coil springs with bigger diameters, resulting in overall cost savings.

Such Seals are compact, robust & bi-directional to Use in clear as well as contaminated liquids. The Wave Spring Mechanical Seals can be offered in several designs in single or double & Un-balanced or Balance Confugiration. Most Common are.UE-M Series Mechanical Seals :it is having loosely fitted face with 'O' Ring, hence easy to assemble .

We offer Wave spring mechanical seal manufacturer, which are engineered for handling dirty & mild slurry application.Such Seals are compact, robust & bi-directional to Use in clear as well as contaminated liquids.