How To Choose Right Cutting Fluid

By Author: Jason Carter
Total Articles: 61
Comment this article

When selecting right cutting fluid, there are too many factors you have to consider, believe it or not, some factors which seems be of little importance would become the key of choosing right cutting fluid. For example, the gear shaping would be in most case with coarse manufacturing technique, after being formed with gear shaping, wheel gear should be grind with special working procedure and tools so that it would finally have better cutting performance. Under such circumstance, it is better to choose cutting fluid with relatively low activity, which can not only meet the common manufacturing requirement, but also the cutting tool’s working life can be extended. On the other hands, if the number of wheel gears processing production is limited and there is also no subsequent grinding working procedure, it is better to choose cutting fluid with high activity, at this time, the products quality is the first factor you have to consider and cutting tool’s working life and the processing efficiency is the secondary factor.

In short, the selection factor and selecting steps of cutting fluid is not fixed, generally speaking, ...
... you have to consider these factors including processing technology, processing condition, cutting tools, cutting materials, products quality, health and safety, liquid waste treatment, relevant regulations and economic condition.

According to the manufacturing technique and manufacturing requirement, you’d better make the first judgment whether it is right to choose oil-based one or water-based one. According to the using experience, if you use high speed steel saw blade for cutting and sawing at low speed, it is better to choose oil-based cutting fluid, on the other hands, if you want to use circular saw blade for cutting and sawing at high speed, the water-based cutting fluid would be your wise choice. If there is higher quality requirement on products and the cutting tools is too much complicated, you’d better choose oil-based cutting fluid while if you want to increase the working efficiency, water-based cutting fluid would be the wise choice. As for the cutting area where is difficult to be given cutting fluid or cutting fluid itself is not easy to get, it is better to choose oil-based, on the contrary, please choose water-based cutting fluid as wise choice. All in all, when using oil-based cutting fluid, the products would get better degree of finish and its working life would be longer, when the cutting speed is higher, only water-based cutting fluid can be used, otherwise it is easy to result in serious smog.

Different Circular Saw Blade including Wood Saw Blades and Panel Saw Blades are offered at Flostools, one professional circular saw blades manufacturer. In addition, Aluminum Saw Blades is also available at affordable price.