Accurate Industrial Weighing Using Bench Scales

By Author: Mel Joelle
Total Articles: 4328
Comment this article

Industrial scales are the backbone of many industrial applications. They come in many shapes and sizes for different requirements. These include pallet scales and floor scales, drum scales, tank scales and cylinder scales. For lighter loads there are smaller platform scales. To count by weight, parts counting scales are used.

One of the most common types of industrial scales is the bench scale. Generally, they are available in capacities ranging from about 10 pounds up to approximately 150 lbs. As a rule of thumb, the lighter the capacity of the scale, the higher the resolution of the display. For example, a ten pound capacity scale may be able to display increments as small as 0.001 lb. Whereas a one hundred pound scale has ten times the capacity, it may have only one tenth of the readability, resulting in display increments of 0.01 lb.

Although the readability of the bench scale is important, the overall accuracy is a defining value. Arlyn Scales produces bench scales that provide levels of accuracy that are suitable for industrial measurement. Many of the important design elements that result in good accuracy ...
... can be traced to the electronic sensors of the digital scale. These sensors must be very rugged, or they will be quickly damaged in an industrial environment. But they must also be very sensitive. Additional characteristics include the ability to produce correct results over a wide range of temperature. For these reasons, Arlyn Scales uses a special stainless steel alloy in the production of their weight sensors. Additional electronics are built into the sensor to detect the ambient temperature of the bench scale, and to adjust the electronic output of the sensor to compensate for temperature variations.

Of course, the bench scale must also include accurate digitizing circuitry to convert the sensor output into a digital value for the display. These circuits must react quickly to any change in weight on the scale platform, while also filtering out the results of air movement and vibration.
Click here to read the rest of Accurate Industrial Weighing. If you enjoyed this article, you also might like our other stories about Bench Scales.