Necessity Of Hot Runners In The Injection Molding System For Greater Efficiency

By Author: Jennifer Joe
Total Articles: 35
Comment this article

It is the injection molding system with the help of which the manufacturers of plastic make use of different raw materials to form the end plastic parts. Raw materials in the form of molten plastic are injected into the mold cavity available in different shapes and specifications to get the desired plastic parts. There are several components in this system, and the combination of each of these components together help in the efficiency of the production. It also due to these different components that the parts produced is of high quality. Among the different parts and components, the heating unit is the most important part of the system.

Preference Of The Industry Veterans:

The Injection Molding System can work both with a hot and a cold runner system. However, most of the industry veterans actually prefer using the hot runner, because there are plenty of benefits and advantages associated with it. For instance, the processing speed taken by the system in faster and proves to be cost-effective, as a whole. In addition to that, good quality parts ...
... are also produced when the runner used is hot instead of cold. It can help in controlling the temperature of the system, because it is available with controls.

Cold Runners Does Not Require Temperature Control:

Well, there is a controller system only in the cold runner and not the hot one. This is mainly because the cold runner has to be frozen first before it can be made to work. On the other hand, the mechanism associated with the Hot runner injection molding is slightly different and little more complicated. It is important to maintain the right temperature at a uniform level, so that the entire procedure can be carried out without any hindrance. If the temperature can be maintained throughout the process, the procedure can be quite efficient and fast unlike the cold runners.

Necessity Of The Controller:

With the progression of time, manufacturers have increasingly felt the need and the importance of the controller with the hot runners. If the temperature is not balanced and maintained, there can be a problem in the production process. Moreover, often the temperature displayed on the machine is not the same as the actual temperature making it difficult for manual workers to detect the temperature required. Thus, making use of controllers to detect and maintain the right temperature is essential.

Thus, it can be easily seen that the technology of Hot runner injection molding is in more demand than the cold runner. In fact, the cold runner system is almost becoming out of date. Skilled workers are hired by the different manufacturing units, so that they can understand the complexity of the operation and can carry out uniformity in the entire process of production. Thus, the range of system in hot runners that are available in the market has also increased tremendously. These systems are being designed in different manners, and it is rightly up to the manufacturer to make informed decision about the system.

About The Author:

This Article is written by Jennifer Jerry on behalf of Anole Injection Tech. which is a leading Hot Runner System Supplier in China with credible quality Hot Runner Nozzle, Hot Runner Injection Molding, hot runner heaters and hot runner controls at a low cost with optimal reasonable size, design, high quality and high heat conducting performance steel. To get more information about the hot runner & hot runner troubleshooting, please visit my blog http://anolehotrunner.metroblog.com/hot_runner_moulds_are_better_choice_for_injection_molding_system