Fireplace Mounting Of The Television With The Plastic Protector

By Author: marshel luise
Total Articles: 96
Comment this article

Fireplace mounting has become very powerful now days in the whole world and if you don’t do it yourself so there are chances that you know someone who has an idea of this type of mounting because normal mounting doesn’t give as good look as fireplace mounting gives to your home some people say that it is not an extremely good idea but still people always want to mount their television over the fireplace region for that it looks attractive and gives a unique look to your home.
Wall plate installation
To mount your television over the fireplace you need to plate installation to install your plate successfully add the upper and lower sections to the wall plate and these plates may be in some different shapes and in this plate upper and lower section will be to fit on your mounting location and to install plate fits screw at the selected position and lighten with the included wrench.
Wood stud installation
When you are going to mount studs so make sure that two studs should be 16’ apart and try to use high quality electronic stud finder and thus you have to use to locate the dead center of two ...
... studs and you have marked their location with pencil.
With the help of bubble level and assistant to ensure wall plate level and now locate the wall plate on fixed location and now you have to mark right and left positions of the small horizontal slots that are aligned with slots and mark four positions total and take down the wall plate .In next position you have to drill two holes and check the bubble level and you have to verify that wall plate is in level and not creating any problem and for each location you have to insert a bolt H and washer J in to the wall and make them tight but don’t make them fully tighten until all bolts are in place and try to tighten the bolts with the open ended socket wrench by turning clockwise until fully tighten.
Caution- When you are going to mount the television plate on the wall please don’t make bolts fully tighten because it can cause unnecessary damage to the wall so that avoid excessive torque and one more thing is here that don’t leave a plate until it is properly mounted to the wall.
Concrete brick installation
To install brick concrete anchor must be used and you have to begin by placing the wall plate into the position again the wall and try to use a bubble level to keep it in level and now you have to locate holes directly into the block or concrete but never into the mortar between the blocks .In the next step you have to mark six holes and these holes will secure the mount and place the wall plate aside and now insert the concrete anchor into each hole and you can use hammer also if there is a need to lightly tap the anchors into the place after this you can install a plastic protector and display plate and after that you can adjust final installation after the installation of television over the fireplace professional experts will provide you technical support and warranty information .