Hot Runner Troubleshooting And Its Needs

By Author: Jennifer Joe
Total Articles: 35
Comment this article

In the plastic industry, hot runner is one of the most common devices used for the injection molding process. It is a very useful device that can help in boosting the level of productivity and lower the cycle of production, as a whole. Though the cold runner system is also available, but the hot runner system is more efficient and therefore high in demand. The initial investment associated with the hot runner system is quite high, but it will certainly return the values of investment. However, in case of a break down, hot runner troubleshooting is one of the primary things that should be done in the entire process.

Different Reasons For Breaking Down:

Since the hot runner is a system, there might be different reasons for which it might break down. Therefore, you should always be ready for it. In case of any kind of breakdown, you should think of hot runner troubleshooting at the earliest. Another important thing that you need to do in this context is to identify the problem. For instance, you might find that the heating element in the hot runner is damaged. It is this element that is the major source of heat to ...
... the machine, and when the heat is lesser than the desired temperature, the products might be short molded.

Inaccuracy Of Controller:

Often, the inaccuracy of the controller in the heating system might also require Hot Runner Troubleshooting. The main function of the controller is to control the temperature associated with the entire process of production. However, if there is a fault in the area, a short circuit might occur. The controller might also get damaged due to which it will fail to show the right temperature. This indicates that the actual temperature required will be much higher than the temperature that is projected in the machine.

Breaking Down Of The Spare Parts:

Often, the spare parts of the hot runner system might also break down. You need to identify the exact part that has broken down, and on the basis of that, you will have to consider the need for hot runner troubleshooting. Since the process is always carried out in higher temperature some part might burn out. Steel transformation might also take place, which in turn can create an impact on the functioning of the entire system, as a whole. The machine might also leak if the connecting piece is broken.

Compatibility Of The Temperature:

If you really want to avoid hot runner troubleshooting, it is very important to ensure that the system runs efficiently. Therefore, you should always check out that there is compatibility between the temperature of the injection mold and the temperature of the hot runner. This will certainly prevent leaks or any other kinds of breakdown in the system for which troubleshooting might be required. Moreover, if you can maintain the system and its operation carefully, the problem associated with the system will also reduce, which in turn, will also reduce the need for troubleshooting.

About The Author:

This Article is written by Anole Injection Tech. which is a leading hot runner system supplier in China with credible quality hot runner nozzle, hot runner injection mould, hot runner system, injection molding System and hot runner controls at a low cost with optimal reasonable size, design, high quality and high heat conducting performance steel. Please visit our website http://www.anole-hot-runner.com/ to get more information about the hot runner system.