Setting Up And Troubleshooting Your New Beverage Cooler

By Author: Mary Hawley
Total Articles: 8
Comment this article

Whether sliding door swinging door, countertop showcase, milk cooler or storage cooler, using and installing a beverage cooler can be a difficult task without the proper preparation. If you have bought a new beverage cooler and are replacing an old one, make sure to remove all the doors on your old unit, leave the shelves in place and have the unit removed by a qualified technician.
When choosing a location for your beverage cooler, keep in mind you should pick a place that is close to any grounded electrical outlets. You should not be using any adapter plugs or extension cords. To get the best use of your new beverage cooler, make sure you choose a spot where the temperature is around 75 degrees Fahrenheit for the best performance. Leave a couple inches of space between the wall and the backs and sides of your beverage cooler to make sure there is great air circulation. Remember that the exterior walls of your beverage cooler will become warm from the compressor and the temperature near these walls can be at least 30 degrees Fahrenheit more than the room, so be sure you have proper air circulation and space. And it should ...
... go without saying, but please do not place your beverage cooler near any hazardous or combustible objects.


Your beverage cooler can be very heavy, so be sure all four corners of the bottom of the cooler are resting on a solid surface or floor and be sure the beverage cooler is completely level in order for it to function properly (as to not cause sealing or frosting issues).


To clean your beverage cooler, wash any removable parts with a mild detergent and wipe dry. For a long-lasting beverage cooler, do not clean with harsh cleaners or razor blades and do not remove the serial plate incase of any warranty or returns needed.


To save money and energy for your business, make sure to install your beverage cooler out of direct sunlight, away from heaters or heat-producing appliances like dishwashers and preferably in a cool, dry part of a room. Again, make sure the beverage cooler is level so that the door is closed tightly and there is no cool air escaping. To cut down on moisture that could build up in your beverage cooler, make sure to wipe all containers dry before placing them in the cooler. Do not overstuff the beverage cooler or block any air vents as this will make the cooler run longer and cost you more money. And further on that last point, do not line the shelves with any paper, aluminum or wax, or any liner for that mater, which will make the cooler less efficient.


As long as you take the aforementioned precautions and steps, you should get the most out of your new beverage cooler and save money for your company as well. And remember, if you are going away on vacation and the beverage cooler will not be used for a temporary period, remove all items and unplug the cord and leave the door open slightly!

Mary Hawley is a freelance writer for Powers Equipment, an online refrigerated equipment manufacturer company offering wide range of glass door beverage refrigerator, beverage display coolers and more. Visit our website today to explore more.