How To Install Commercial Carpet?

By Author: Salvatore Andrea
Total Articles: 6240
Comment this article

If you want a carpet for a high traffic zone then a commercial carpet is what you need. Commercial carpets are highly durable and relatively cheap. You could find a huge variety of commercial carpets in various designs and colors and you could install them at any place let it be an office, a shop etc. Even commercial carper installation is a very easy job and requires minimum tools and effort. Here is how you can do it-
1) The very first step of carpet installation is to lay the carpet in such way that that each edge of it is put tightly to the corner.
2) With the help of a knife cut of the edges which are extended. Do in such way such that the carpet is perfectly laid on the floor and all its edges are close to the walls.
3) Fold half of the carpet to one side so that the floor is exposed.
4) Apply commercial carpet adhesive on the perimeter of the floor area, which the carpet covers. The adhesive should cover one foot boundary of the perimeter. Read the directions of the adhesive for more details.
5) Unroll ...
... the carpet again and then press tightly on its edges so that it sticks to the floor tightly on the edges. Make sure that you smooth out any wrinkles or folds during the process.
6) Now, fold the other half of the carpet in the same manner and apply the adhesive on the floor perimeter. Just like the steps taken for the other half portion press the edges and unroll the carpet.
7) Just to be assured again press the edges of the whole carpet firmly so that not a single portion is left out.
8) Congratulations! You have successfully installed the carpet all by yourself!