Working With Fellowes Paper Shredder

By Author: grady mekhi
Total Articles: 1
Comment this article

Fellowes paper shredder is an equipment used to destroy documents some of which are very sensitive paper shredding has long been associated with corporate documents but in recent years it has become more common. This is because people are now more aware of identity theft. However paper shredders are associated with jamming, squeaking, making a lot of noise, stopping and shredding less than capacity. If your Fellowes shredder is having these problems then here are some tips that might help you.

Trouble shooting Fellowes shredder
If the shredder has jammed, you can empty the wastebasket and then move the power switch to the reserve position. This helps reserve the jammed paper out of the Fellowes shredder. If this persists then move the switch between auto and reserve. If this also fails then you can remove the paper manually.

You need also to oil the Fellowes paper shredder frequently. Some of the indications that the shredder needs oil are; squeaking, rubbing noise and when it is performing bellow capacity. you can oil by pressing the reserve button and holding it down and then place the tip of the bottle ...
... containing oil in the paper slot and the spread it. After this you can now run the blades by using the auto button and the run the Fellowes shredder in reverse. You can repeat this for few minutes.

If the shredder suddenly stops, you can turn it off and let it cool. This happens in times when the shredder is overloaded. You can also move the power switch to forward position or auto for some seconds. If it only works in the reverse position then the Fellowes paper shredder may be blocked.

How to Recalibrate a Fellowes Shredder
You can extend the life of your Fellowes shredder by recalibrating it. This is because as the shredder is used the cutters may dull which may cause more paper jams. The detectors may also wear down making the Fellowes paper shredder to work at less capacity. you can do your calibration by doing the following.First you need to unplug the shredder and then remove the media safety guide. You can do this by bending it for it to pop off. You can also use your fingers to pull the media safety guide cover. You can use a screwdriver to pop it out.

After that then you need to unscrew the Phillips head screw using the right screwdriver and open so that the sensors are exposed. Using a moist cloth wrapped around your hand the wipe out the dust off the sensor. After this you can then put everything back in its right place then try the Fellowes shredder to ensure everything is fine and it is working correctly.

It is also good to oil the shredder cutters using the appropriate oil. This is done better when there is an extension nozzle to the spray. This makes it easy to do the spraying directly. While using the spray you are supposed to hold the reverse button so that you can evenly spray the cutters. You can switch to the auto position and then run the blades for three seconds. Lastly run the shredder for few seconds in the reverse position and then rotate with the auto position four to five times.

Looking for the best paper shredder? Check out Fellows paper shredder. You can also read review about Fellow shredder at homeandofficetech.com