Choose A Dewatering Company With Diverse Pumps

By Author: Jeff Hewson
Total Articles: 14
Comment this article

Dewatering is, as the name suggests, the science of removing water – in most cases, this is surface water or water trapped in the soil at or near a mine or a construction site. Water can pose a real threat to anyone working at a construction site or mine by undermining structural components – and trying to dig a foundation that fills up with water is clearly a non-starter. Therefore, it is very important that dewatering be correctly planned and put into operation.
With this in mind, a prudent project or site manager will painstakingly implement Dewatering Systems that are adequate for the job at hand. Bear in mind that there are typically two sorts of dewatering issues: the kind that you know about (by testing the local soil) and can plan to remove with diligence, forethought, and the proper equipment; and the kind that springs up from weather issues or accidents, causing unanticipated flooding. The sudden onset of flooding requires the proper equipment, of course, although it also should involve an experienced and professional pump rental/dewatering company to get it set up and dealing with the issue as quickly as ...
... possible.
Assuming you do not have an emergency, what you need to establish Dewatering for Construction Sites is a similar set of requirements – you will just have more time to examine your options. It is very important that price is not the sole consideration, however. Saving money up front will not be of much use if you end up paying later in terms of work delays due to improper equipment or lack of vital replacements due to untimely breakdowns. For this reason, weigh such factors as depth of stock, variety of specialized equipment (do not forget the fittings that go with the pumps, for example), dependability, and operational support.
There are a number of dewatering systems from which to choose, most of which are situational. If you have a lot of surface water, simple sump pumps may suffice to remove it (although bear in mind that you may need robust “trash” pumps if the water contains a lot of bio matter, silt, or gravel). For control of a local water table that is not too deep, a vacuum point pump network where many closely spaced pumps feed into a single main pipe for removal is likely the best solution. For more significant amounts of underground water, particularly if it runs deep, a deep well method (possibly using an eductor pump) is probably what is required. As for the specific equipment needed, that will definitely depend on the permeability of the soil and the amount of contaminants within the water.

Author Bio:

The author of this article is associated with Dewatering Systems , a company that specializes in dewatering solutions and equipment sales and rentals, for more information visit aquatechdewatering.com