Order Irevive Spray To Regain Life Of Water Damage

By Author: Revive Spray
Total Articles: 2
Comment this article

So you just dropped your most important possession in water, and now you are freaking out that you might lose your vacation pictures, contacts, and worst of all, your high scores on your favorite games.

You might recall something about putting the phone into rice, or even putting your phone into the oven. But the truth is even after the water evaporates, it leaves behind salts and other minerals that will start to corrode your phone from inside out! Have you ever seen the salt flats in Utah? That is what the inside of your phone will look like!

Turn Your Phone Off!

Immediately when your phone comes in contact with water, TURN IT OFF! Resist the urge to test if it is working, because you are much more likely to damage something by running power through the circuits with water on it. If you dropped it into salt water, make sure to rinse it with fresh water. This will wash away some of the salts and prevent water damage and corrosion before you can open the phone up and properly clean it.

The phones have water damage indicators inside of them, so don’t be afraid to rinse it with fresh water ...
... because it's likely the salt water already tripped them! Once you have done the above, you can take the SIM card out and put the phone in a dry place.

Order iRevive Spray or Send It In

The next step is to get a product like iRevive Spray as soon as possible. They sell iPhone water damage repair kit, that come with a solution to clean the inside of the phone, as well as all the tools and instructions to fix the phone yourself.

If you are not comfortable in taking the phone apart yourself, you can mail it in to the iRevive technicians, or call a local repair shop and see if they carry iRevive. Opening Up Your Water Damaged iPhone The most successful way to save your phone from water damage is to open it up and clean it thoroughly. The best way to do this is to watch video instructions on how to fix water damaged iphone. To open up any iPhone the first step is to remove the two bottom screws. Then the process gets different depending on what kind of phone it is. An iPhone repair screw chart is really helpful in keeping everything organized and prevents you from losing any screws! When you take the battery out, it should feel hard and solid. If it feels like it has started to swell up and is squishy, you will probably need to put a new battery in as well.

Cleaning the Logic Board

Once you have the logic board (the brains of the phone) out, you will need to remove the protective shielding so that it exposes the chips on the board. Spray iRevive onto the board and then gently clean it with the provided brush. Inspect it closely looking for any signs of corrosion (which is white and green usually around the base of the chips), and brush until it is all gone.

Let the Board Dry and Reassemble

Once the board is good and clean, take a look around the rest of the insides of the phone. Clean any spots with iRevive that appear to have corrosion. Then let the board sit, while still outside of the phone and dry for a couple hours.

Once everything is dry follow the instructions for reassembling the phone. Make sure to go slowly and don't force anything! If something is not fitting then you probably need to take a couple steps back and see if there is something out of place.

Power It Up

Once its all the way back together hit the power button. If that doesn't work at first, then connect your phone to a charger and you should see it come on! If it still won't come on you can always sell the phone on eBay for some good money. People buy them to use the rest of the phone as spare parts all of the time.