Air Compressors Repair - What Do You Need To Know?

By Author: Johnathan J
Total Articles: 5
Comment this article

Industrial Air compressors in NI is critical equipment that must be handled with care. Preventive maintenance is usually performed by trained technicians who follow a pre-planned schedule.

Here are some tips to minimize air compressor repair in NI:

• Air compressors contain a lot of pressurized air and this can result in a rupture or explosion. To avoid this, the pressure gauge must be regularly checked.
• Care must be taken to avoid overheating since the air compressor contains parts that can ignite when in close proximity to heat or fire. The equipment must be located at a safe distance from other heat producing equipment with adequate air circulation.
• Oil leaks are not uncommon with air compressors. An undetected leak can be dangerous for the entire facility. To avoid this, the technician in charge of air compressor repair in NI must regularly check the machine and make sure there is no moisture in it as this is also likely to result in an explosion in the high pressure environment.
• Depending on the type of compressor, the oil must be changed at the right frequency. For example, ...
... in rotary screw compressors, this is every 7000 hours of operation. In reciprocating models, the change is recommended once in three months. The operation manual indicates the exact schedule for the specific model and this must be strictly followed.
• For compressors with an air intake filter, this should be cleaned once a week. A dirty filter can wear out quickly affecting the quality of the air. If the filter is damaged or has holes it must be replaced right away to avoid major repair costs.
• Water is a critical aspect to watch out for. Any water in the compressor is likely to result in rust and any traces of this must be immediately attended to. Sometimes, water also accumulates in the lines due to a faulty condensate tap or air compressor dryer. This can be tackled by cleaning the water trap or replacing the dryer.
• If the compressor does not produce enough air, the air tank must be drained. Assuming the pump up time is okay, this might be an indication that the compressor is too small for the requirement. The air lines, tank and compressor fittings must be checked for air leaks. If the air filter is clogged it must be cleaned. The air intake must also be clean. If hot air is emitted from the intake, it means there is a problem with the valve seals. Any worn parts must be replaced right away. If the valve or discharge tubing is clogged, they must be cleaned or replaced.
• Some air compressor repair in NI can be due to excessive oil consumption. This can be diagnosed to check for clogged air intake filter, quality of oil, air leaks, loosened bolts, worn piston rings, gap in the ring, scratches on the cylinder wall and oil in the air discharged. These must be checked and rectified
• The air compressor must be located in a well ventilated area

Taking good care of industrial air compressors in NI can help identify problems before they build up into huge repair costs.

Power Air is one of the best suppliers of Industrial air compressors in NI. They offer a wide range of air treatment products and Industrial Air Compressors in NI at very reasonable cost. For reliable and affordable industrial Air compressor repair in NI, feel free to Contact Power Air.