Mean Well’s S-25-5 Power Supply

By Author: power peaks
Total Articles: 4
Comment this article

The Switching Mode Power Supply is the electronic power supply equipment which efficiently converts electrical power. By transferring power from a source to a load, the SMPS ensures a regulated output voltage. High efficiency, lower heat generation, light weight etc. are the advantages of this equipment.

Mean Well’s S-25-5 is a single output switching power supply is having 25W power with universal AC input. The detailed features of the S-25 category include the functions of short circuit / over load / over voltage protections with an over load protection range of 105% - 150 % hiccup mode and auto recovery. The over voltage protection range is 115% - 135% rated output voltage. Fixed Switching Frequency at 56 KHz, UL / TUV / CE approvals, cooling by free air convection, 100% full load burn-in test passed and 2 years warranty. AC input voltage range is 85 – 264 VAC & 120 – 370 VDC. AC inrush current is Cold start 15A at 115 VAC & 30 A at 230 VAC. DC adjustment range is ± 10% rated output voltage. Set up, rise and hold up time are 300 ms – 50 ms, 80 MS at full load and 230 VAC. Withstand voltage ...
... is I/P - O/P; 3KVAC, I/P - FG; 1.5KVAC; 1 minute, Working temperature 0 – 50 °C at 100%, -10°C at 80%, 60°C at 60% load. The safety standards include UL 1012, TUV EN60950 approved, Electromagnetic Compatibility (EMC) Standards included EN55022 class B, EN61000-3-2,-3, EN61000-4-2,3,4,5, ENV50204. Connection: 5P / 9.5mm pitch terminal block.

Among the industrial power supply items MDR-20-24 is a product with pretty good demand. DIN Rail power supplies are the industrial grade performance power supplies which is able to face any rough environmental conditions such as temperature degree of -25°C to +60°C. The features of the product MDR-20-24 include Universal AC input / full range, short circuit / over load / over voltage protections, cooling by free air convection. It can be installed on DIN rail TS-35/7.5 or 15. NEC Class 2/ LPS compliant, built in DC OK active signal, no load power consumption