Fix The ‘’cpu Fan Error’’ Message On Your Asus Motherboard

By Author: Crieg Wilson
Total Articles: 95
Comment this article

If you have installed an Asus motherboard in your computer then you might face motherboard issue. It is quite regular in case of Asus motherboards. The trouble arise when you get the ‘’CPU Fan Error’’ message in your computer and you are constantly prompted to hit the F1 button to continue. When you are in between a very important work then this error message appears to be a constant disturbance for you.

Online computer repair team can provide help in this case and their service is affordable and time saving. The motherboards of Asus which have this particular kind of trouble is the 945GC; M2N-MX etc. The main reason of this trouble is that the motherboard is unable to the RPM of the processors fan.

However, don’t worry or think of replacing the Asus motherboard if you already have any of the above devices. There are possible remedies of this kind of trouble too. You can follow the below lines and try out some of the troubleshooting steps.

1. Incorrect Fan Connection: You will find majority of the motherboards in the market ...
... provide individual fan ports and video cards and CPU. Now, if by mistake you put the CPU fan’s connector to the wrong port; then it becomes hard for the motherboard to find out the correct fan. Hence such message appears on the computer screen.

2. If the Speed of the Fan is Very Slow: If the motherboard that you are using is very old then trouble may arise. Even dust accumulation in your motherboard can also make you face such error messages. In any of such condition of the motherboard the ‘’CPU Fan Error’’ message can appear.

Motherboard problems cannot easily be resolved with out the computer technical support staffs. In order to fix this, you need to put some transformer oil on the fan; this will help you to remove the dust from your computer fast.

3. When the Fan Does not spin: when the motor or sensor inside your fan gets broken, its repairing might not be possible. Hence, you are advised to replace the old fan with a new one.

A. First turn off the computer and unplug the cord. Open the case and locate the heat sink; this is the metallic cube sitting up for the motherboard.

B. Take out the four screws from the heat sink and remove the top panel.

C. Slide the fan and wire out of the heat sink and check out an arrow which will guide you.

D. Insert the fan and connect its wire to the CPU’s fan connector.

This might not be an easy task for the non-tech personnel. This is one reason why you should seek computer help from the professional experts.

4. Wrong BIOS Settings: If after trying all the above troubleshooting methods you still face the ‘’CPU Fan Error’’ message; then try another method. Enter the BIOS settings in your computer. Look for the settings on Fan Speed; then change the settings to Disable or Ignore.

Aren’t you confident in performing the task alone, call for a prominent remote computer support.

Online computer support service providers are experts in configuring CPU fan. You can contact them for hardware technical support too.