Energy Conservation And Lighting Controllers For Airports

By Author: solar hot water Peter
Total Articles: 139
Comment this article

Transportation, especially air transportation, is inherently an energy intensive process. Airport operations consist of a significant amount of overhead costs. To coordinate the take-off and landing of multiple aircraft is no small feat. Flights may be arriving from or departing to anywhere in the world; preparation for departure may take place anytime.

Airports require coordination of a variety of resources; electricity, energy, water and fuel. Airports need energy conservation for travel to remain possible and thriving in the future. Implementing energy conservation in airports effectively requires an over-arching network of energy monitoring and resource management. The Energy Surveillance System (ESS) from EG Energy Controls is a versatile solution for energy conservation airports. The system consists of energy monitoring modules, capable of measuring and transmitting information on up to 17 sub-loads each. A sub-load may be electricity usage due to lighting in a certain wing, fuel levels in a loading bay tank or water consumption in an area in the airport. In brief, the Energy Surveillance System can measure electricity, ...
... water or gas, making it capable for energy conservation in airports.

One cannot manage what cannot be measured; with energy monitoring in airports provided through the Energy Surveillance System, energy usage can be reduced by 7% right away. This information can be provided directly in automated reports, based on any energy monitoring criteria in airports. This provides automated benchmarking for energy monitoring in airports. Particularly beneficial for energy conservation in airports are the integrated weather algorithms. The Energy Surveillance System keeps track of weather and can predict energy usage based on this information. Airports seeking energy conservation solutions should consider the Energy Surveillance System for general energy monitoring.

Another, more specific, method for energy conservation in airports would be through HID lighting controllers. HID lights are high-powered lamps, typically used outdoors in situations like parking lots and runways. The Volt Miser Lighting Controller, offered also by EG Energy, can reduce electricity used by HID lamps by up to 25%. The system uses an autotransformer to reduce the voltage at the ballast, and conserve energy. In airports, HID lighting controllers could provide an extra edge for energy conservation. For a quote on installation of this lighting controller in airports, please contact sales at egenergy.com with the following information: number of lights, wattage of lights and make of breaker panels. Due to the nature of installation, the Volt Miser need only be installed at the electrical panel, not every light.

Lighting controllers in airports can work with other energy conservation systems to enact efficiency and reliability, keeping air travel going, at lower costs.

This is a guest post by James Peter. He is a fairly well-known HID Controller and Lighting Controller.