Low Wattage Directional Strobe Heads For Emergency Lighting

By Author: Sunil Punjabi
Total Articles: 2554
Comment this article

Low wattage directional strobe heads can be very useful because they are small and efficient, easily portable and do not consume a lot of energy for emitting a warning signal either. Warning beacons and directional strobes can be useful because of their powerful warning lights which are penetrative and have an excellent reach. With encapsulating domes that extend the beams horizontally and vertically, these strobes are ideal for sending cautionary signals to other motorists on the road without really consuming too much energy. Colourful translucent domes are used generally to fill the light head completely. Coloured lenses also can be used in combination with the LEDs. Directional strobes with their ability to flash more than 100 times every minute are well secured from polarity reversal and are weatherproof with IP65 and IP66 sealing.

strobe light heads might be small in size measuring 3 to 4 inches in either directional especially when they are circular in shape. However, operating on dual voltages and with minimal current that stays below 1 Ampere, these strobes really pack ...
... a punch. They can generate high intensity beams that wouldn’t be missed, not if they are also operating with flash sequences pre-programmed into them. Coiled xenon strobe tubes sometimes come with 3-piece telescopic poles. These pole mounted strobes are ideal for motorcycles. The strobes come with internal Fresnel lenses. The external Lexan domes are smooth. Polycarbonate, high impact resistant, domes are also used in a variety of colours to get wide angle beams during emergencies.

There are remote strobe heads too, which can be flush mounted into the radiator grill of a vehicle for bright lighting in the front. You can get strobes with deeply coloured domes in blue, red or amber. You can also go for split colour strobes with a single segment broken down into two areas, each with a separate colour of LEDs or domes. Coloured domes prove useful when used with LED strobes. This is because you can use the same set of white LEDs and just change the domes to get a different colour of warning light. The domes can be installed or removed easily as they are connected only with a few screws. Linear strobes are sometimes soldered on to the surface of the vehicle to make sure that the lights are vibration resistant and are well secured on the surface of a speeding vehicle.

Directional strobe heads sometimes come with pedestal surface mount brackets. They are available in the form of gyratory beacons that rotate easily providing 360-degree visibility to the warning light. One can choose between flush and pedestal mounting options. There are shielded cables and connectors in the kit too. Modern strobes have the capability to be connected to other emergency lighting units so that they can deliver a synchronized warning signal. strobes can be mounted almost at any point on the vehicle, in the front, rear or on the top. Their utility is also because of their versatility as far as usage is concerned.

Extreme Tactical Dynamics is a one-stop shop for
Strobe lights and many other items like Flashlights, Deck Lights, police lights, etc. Please visit the site for more details of various items available - http://www.extremetacticaldynamics.com/