Ensure A Correct Boot Process For Your Computer

By Author: Crieg Wilson
Total Articles: 95
Comment this article

There are two cases when your computer may boot. When you start your computer or restart the computer, it undergoes a warm boot and when you close down your system, it calls in a cold booting process. The online tech support will let you understand it in a better way.

The booting process includes many specific tasks that the system undergoes. There are host of programs that take place as the computer boots and the operating system checks each and every program from the setup drive. So, if there is any mistake in the steps, this will not boot the computer or a wrong program will take hold of wrong setup file from the driver ejecting error messages.

So, take care or avail proper computer support when your system boots up. If you want to get the solution to fix boot-cycle problems, call for the computer technical support that can cure the problem. You must take the note of the error message generated as this will help the online computer support to locate the problem with your computer faster.

Mistake in POST

Your system undergoes ...
... a POST, Power On Self Test to check that the hardwares are installed correctly. When the computer BOOTS the BIOS i.e. the Basic Input output Device then the instruction in the non-volatile memory of the motherboard checks the programs and the compatibility of the programs like the verification of the battery that retains the start up preferences of the system, checks the systems memory, checks the compatibility of the drives and keyboard etc.

If there is any fault found in the process then the system will generate errors on the screens and certain beeps will identify problem with your computer.

Stop in the device Checking process

System locates the driver while booting. If it fails to determine the program, then the Booting process will stop. If you have installed a new operating system or a new device or software, you might have to intimate it to the BIOS of your computer.

Press the F2 key to get to BIOS setup settings to assign the changes made. If you have entered wrong setting in the BIOS setup, this will lead you into serious problems.

Issues Related to Memory and Video

Make sure that the memory and the video card are working fine within your system. If you find that the memory has corrupted or is not compatible with the system then your BIOS might not boot or stop the booting process. Moreover, even if you pass the initial test yet you may find that there is a difference in the memory space on your system with the actual memory installed in your system.

This might have resulted due to incompatible memory module or might be the RAM has got loose from the slot. So, make sure that that RAM is installed properly.

Moreover, the case is same with the graphics card installed in your system. If you find that the card is not compatible with the system or the operating system then you have to change it or might have to reinstall the card with proper drivers. You might get the drivers from some of the best online pc tech support sites.

The online PC tech support website will help you find the right computer help to solve your problem.