Different Types Of Hydraulic Pumps In India

By Author: Dylan Rodriguez
Total Articles: 131
Comment this article

Hydraulic pumps in India are manufactured by a number of country's leading manufacturers. A hydraulic pump is utilized in hydraulic drive systems. This system is a kind of transmission system that depends on pressurized hydraulic fluid to boost the performance of hydraulic machinery. A complete hydraulic system contains three components, which are hydraulic pump, an electric motor and a combustion engine. An electric pump drives the hydraulic pump and ideally these pumps can be either hydrostatic or hydrodynamic. Hydrostatic pumps are also known as positive displacement pumps, which mean it is a machine with a constant flow. But due to an increase in the leakage that takes place internally, a continuous flow rate cannot be followed. Different types of positive displacement or hydrostatic pumps include rotary type, reciprocating type and linear type.

The other type of Hydraulic cylinder is called hydrodynamic, which are considered to be a type of fixed displacement pump. In this kind of system, the displacement cannot be attuned, which is in the case of variable displacement pumps. Hence, hydrodynamic is called the fixed ...
... type of hydraulic pump. While these two are the basics of hydraulic pumps, there are exist different types of hydraulic pumps in India that are manufactured on a large scale.

Types of hydraulic pumps

Gear Pump:

In the simplest of terms gear pumps are extremely economical and simple in design and technology. They are known to possess the least volumetric efficiency while the swept volume for hydraulic pump is usually between the ranges of 1 cm3 and200 cm3. The gear pumps are known to develop pressure when the gear teeth are meshed thereby forcing the fluid to put pressure on the outlet side. The gear pump utilizes a certain amount of oil to lubricate, which it gets from the pressurized side of the gears. There are certain gear pumps that can generate quite a bit of noise when compared to other types, but then some of the modern gear pumps operate quietly in comparison to older models and are even extremely reliable.

Rotary Vane Pumps:

In comparison to gear pumps, rotary vane pumps are known to have a better and a higher efficiency and these are also utilized for mid pressure applications. Most of the modern units of rotary vane pumps can perform continuous operating and even manage to cross over 300 bars. In order to obtain an adjustable pump, it is possible to conveniently change the centre of the vane body. Most of these vane pumps that can be adjusted are usually called constant power pumps. The displacement in most case is enhanced till the required pressure is reached by the hydraulic pump and then the swept volume is made to reduce till the equilibrium is reached.

Screw Pumps:

Screw pump is yet another kind of hydraulic pumps that is fixed displacement and features double Archimedes' screw but then it is closed. This implies that it has two screws in one body and ideally this type of pump is used for high flow and low pressure. The benefit of screw pump is the level of sound that is low even though the efficiency is not that high.

For More Information:- Hydraulic Cylinder | Gear Pump