A Beginners Guide To Computer Repair

By Author: Jeffrey Gross
Total Articles: 4
Comment this article

Computer Repair can be a tedious task indeed. One must ask his or her
self "exactly which part of my computer is in need of repair"? Well
this question does not have one simple answer, in fact in many
instances a computer can have multiple problems in need of repair.
Let's start with the most simple questions.

1.Does it turn on? - If the computer does not turn on you must first
check that it is plugged and that the surge protector (if present) is
powered on as well.

2.Does it turn on but produce a strange error message? - If so you may
very well have a software problem. Over time Windows may be prone to
errors. This is not necessarily your fault, but it must be addressed
nonetheless.

Let us take a deeper look into the lack of power issue. A lack of
power can most often be traced back to a faulty power supply. Power
supplies are relatively cheap so don't go rushing to replace your
computer just yet. If you don't feel comfortable replacing your own
power supply, or simply are not convinced that this is the problem,
your only ...
... option may be to bring it in to a local computer shop. The
typical cost for a new power supply and installation should be less
than 100 dollars.

Ok, so your computer does turn on but it does not operate properly.
You may receive strange errors, or your computer may just be sluggish.
Either way there is some action required on your part. Lets first
start by removing some junk files and cleaning up the Windows
Registry. This process is the first, and most essential part of any
Computer Repair process.

We recommend Ccleaner for performing both of these tasks. Grab
yourself a copy at ccleaner.com. Once you have the program, close of
all your web browsers and open ccleaner. Ccleaner is simple to use and
can be learned by even the novice computer user. Click on "Clean Now"
and relax while the program removes almost all of the temporary files
on your machine. These files are often the cause for many common
computer problems. Once this process is done, you will see the results
on the screen. It will tell you how much was removed and which files
were removed as well.

Lastly, lets click on the "Repair Errors" button within Ccleaner.
Just click "Scan for errors" and your on your way! When this process
is completed click on "Fix errors" and you are all set. Now let's
restart the machine. Is it running better? If not, you may have a more
serious problem than a simple junk buildup. At this point you an
further investigate the problem or simply contact your local computer
shop and allow them to troubleshoot it for you.

We hope that this article has helped you to understand the simplest
method of troubleshooting your own computer. Computer Repair is indeed
a daunting task, but with the right instruction and a little bit of
confidence you can more than likely fix anything.