Warning Strobes With Superior Visibility And Great Warning Power

By Author: Sunil Punjabi
Total Articles: 2565
Comment this article

Strobes are used both as standalone warning lights as well as on light bars. Corner strobe lights contribute a lot to the effectiveness of car headlights as well as emergency light bars, by extending the wide angle vision and sometimes providing 360-degree visibility. Gyratory strobe lights rotating in all the directions can be a great asset as far as emergency vehicles are concerned. The strobe lights usually are powered with an input voltage varying between 12 – 30V DC and a current draw varying between 1 – 3 amperes. The power rating of a decent strobe light providing high intensity lighting is lower than 30 – 45 watts.

The output energy provided by top quality Strobes is around 24 joules with an effective candle power in excess of 750 Candela. More importantly, the strobe lights come with built in flash patterns with a flashing speed easily in excess of 100 whenever required. Strobe lights are designed and then rigorously tested to operate in a variety of weather conditions. Some strobe lights are impressively lightweight; they weigh less than 3lbs, which makes it extremely easy to mount them virtually ...
... anywhere. It is easy to even alter their installation from one vehicle to another, depending upon where the need lies. Flash patterns such as alternative and simultaneous flashes, comet flash, quad flash and mega flash are all part of the equipment.

Good quality Strobes come with a branch guard or a high dome which is not only resistant to ultra-violet rays but also not prone to vulnerabilities such as cracking, hot spots, shadowing or yellowing. These domes providing excellent encapsulation for the LED elements can also help in widening the angle of the beam which is quite important for emergency vehicle lights. A strobe light, especially a standalone model can be permanently as well as temporarily mounted based on the requirements. There are permanent mounting options such as brackets, bolts and mounting screws. You can install the strobe lights through headlights or tail lights. You can also mount them temporarily on the roof of the vehicle, in the rear end or in the front with the help of a magnetic mounting kit. Dome covers and switching options make operating these lights far easier.

There are Strobes which can be flush mounted. You will also come across sets of dual Strobes which have a diamond mirror fixed in the centre. As a result, you will get 360-degree visibility. Some strobe lights are highly efficient as they are controlled by a microprocessor and are extremely easy to operate. They are epoxy sealed to keep the effects of corrosion, dust and excessive vibration away. There are special dash mount strobe lights too which come with a 2 screw assembly and a high strength, rust proof, composite design. Replaceable lenses are provided as part of the kit, to attain wide angle light beams. High power rated strobe lights which are designed as per SAE specifications, are known to be micro-thin and lightweight, and come with universal mounting brackets for different kinds of vehicles.

Extreme Tactical Dynamics is a one-stop shop for
Strobes and many other items like Flashlights, Deck Lights, police lights, etc. Please visit the site for more details of various items available - http://www.extremetacticaldynamics.com/