The Kind Of Lighting That Emergency Vehicles Need

By Author: Sunil Punjabi
Total Articles: 2554
Comment this article

The kind of lighting emergency vehicles would need has to be reliable and resilient, feature rich and easily operable. All these features aren’t found consistently together in the same equipment which is why due diligence is advised when you are looking for the right kind of emergency lighting equipment. Manufacturers can offer you compact 3 or 4 inch strobe light heads and dash lights which cost less than $100. They can also provide 72 inch light bars which cost in excess of $2000. Ultimately it comes down to your requirements, your budget and how you balance both these things.

For emergency vehicles, you have to take note of the scale of lighting that you would need. For example, the lighting you need for a patrol car is different from the emergency lighting required in case of a heavy equipment carrier or a tow truck. Obviously, in the first case, compact, dash, deck or visor lights would be more than handy. They can be mounted in the front, close to the bumper or grille, near the rear deck or over the brake, tail and turn lights. They provide a very reliable warning source while being cost effective ...
... and energy efficient. For the bigger vehicles like trucks and trailers, you will need full-fledged light bars, which come in lengths usually over 42 inches. These light bars are decked with strobe lights, LED modules and other kinds of equipment.

The lighting used for emergency vehicles is mostly reliant on light emitting diodes. LEDs usually consume very less power to give you a high luminous flux that will serve your purpose. More importantly, LED lighting equipment is well designed for outdoor usage, which means you can be confident about the resistance of the equipment to adverse weather conditions. You will also need a good mounting hardware kit that will allow you to adjust the angle and position of the mounting for maximum effect. Clamps, brackets, stainless steel straps and suction cups are some of the different types of mounting equipment that you will be able to make use of. Height and angle adjustable brackets are also provided with some kits for further assistance. In some cases, you can install the strobe tubes inside composite headlight or break light systems.

For equipment to be installed on emergency vehicles, you need to look for the warranty available as well as the service, maintenance and upgrades which are important, especially when advanced technology is used. Similarly, emergency lighting would be more effective with better controls that include switch panels, intensity and beam angle control and pattern selection features. Emergency lighting that makes use of filters, clear lenses, diamond mirrors and deflectors tend to be more useful providing greater lighting coverage when required. If you need 360-degree coverage, light bars with corner strobes and gyratory beacons will be really effective. In some scenarios, it is possible to achieve front, rear and full bar operation depending upon your requirement. This helps in efficiency, energy savings and longer life for the equipment too.

Extreme Tactical Dynamics is a one-stop shop for
Emergency vehicles lighting units and many other items like Flashlights, Deck Lights, police lights, etc. Please visit the site for more details of various items available - http://www.extremetacticaldynamics.com/