Effective Strobe Kit To Prepare For Emergency Situations

By Author: Sunil Punjabi
Total Articles: 2565
Comment this article

A strobe kit comprises of a lot of different items depending upon the cost and what you are going to use it for. There are advanced strobe kits, with high power rated strobe light heads and other accessories manufactured with patented technology. There are also medium size strobe kits which are not required for heavy duty usage. When you look at a strobe kit, you will find a power supply which can support the wattage of the strobe light heads. In most cases, a simple DC power supply with a voltage rating between 10 – 30 volts will suffice. This depends on the power rating of the strobe lights. In some cases massive arrays of 1W LEDs are used with a combined wattage in excess of 100W. In those cases, a bigger power supply might be required.

Apart from the 4 outlet potted power supply, the strobe kit also consists of shielded power cables with other paraphernalia like pins and connectors. Interconnect harness is sometimes used to make sure all the light heads mounted on a vehicle are flashing in sync with each other. In other words, it is possible to divide the light heads into different ...
... phases so that there are more permutations and combinations when it comes to flashing sequences and flashing patterns. For example, it is possible to get the strobe lights flashing alternately, sequentially or randomly depending on the kind of warning signal that would be required for effect at a given point of time.

The strobe kit might also comprise of red, amber, blue or green strobe tubes. Clear strobe tubes are also present in some kits. These strobe tubes might come at an extra cost which is why you can pick and choose what you need and what you don’t. Amp connector kit is also present in some cases. Along with these you will also find mounting screws and gaskets in the kits to give you a lot of mounting options. Strobe light heads can be easily installed in a staggered fashion so that you get maximum visibility in all directions. Mounting options also include swivel brackets, stainless steel straps and powerful permanent magnets. You can pick and choose the mounting options based on the budget and the flexibility you seek.

Apart from replacement strobe tubes, the strobe kit also sometimes has additional options for strobe light heads. For example, you can find 4-wire standard pigtails, 5 inch connectors, recessed strobe lights in various shapes and sizes and lighted rocker switches. Plug-in connectors can also be found in the kits depending upon what you are paying for the whole kit. Rear entry tube replacements and heavy duty resistant grommets are also part of advanced kits that you might need if you expect heavy duty usage of the strobe light kits. You might want to have spare accessories in case you are headed on emergency missions where you might need emergency lighting for extended hours with minimal possibility of getting replacements at any given juncture.

Extreme Tactical Dynamics is a one-stop shop for a
Strobe kit and many other items like Flashlights, Deck Lights, police lights, etc. Please visit the site for more details of various items available - http://www.extremetacticaldynamics.com/