Seals And Gaskets To Withstand High Compressive Loads

By Author: John Deangelis
Total Articles: 84
Comment this article

When gasket manufacturers design seals and gaskets, they know that one of the more desirable properties of an effective gasket in industrial applications for compressed fiber gasket material is the ability to withstand high compressive loads. It is thought that a gasket will last longer if more compressive load is exerted on it. There are several ways to measure a gasket material's ability to withstand compressive loading. The hot compression test is probably the most accepted of these.
Depending on various parameters like industrial usage, chemical contact, budget and measures the design for gaskets seals are created. Solid material gaskets can withstand higher temperature and pressure ranges than sheet gaskets. A solid metal must be greatly compressed in order to become flush with the flange head and prevent leakage. The material choice for gasket manufacturers is more difficult. Since metals are primarily used, process contamination and oxidation are risks. An additional downside is that the metal ...
... used must be softer than the flange in order to ensure that the flange does not warp and thereby prevent sealing with future gaskets and seals.
Constant seating stress gaskets derive their name from the fact that the carrier ring profile takes flange rotation (deflection under bolt preload) into consideration. In such gaskets and seals the sealing elements are fully confined by the flange faces in opposing channels on the carrier ring. Any in-service compressive forces acting on the gasket are transmitted through the carrier ring and avoid any further compression of the sealing elements, thus maintaining a constant gasket seating stress while in-service. Thus, the gasket is immune to common gasket failure modes that include creep relaxation, high system vibration, or system thermal cycles.
Current trends in automotive power train applications are pushing elastomeric gasket seal materials to their limit. Gasket manufacturers are using materials that were once state-of-the-art. This is because seals and gaskets are being asked to do more in an era of longer warranties, hotter engines and more aggressive lubricants that may shorten the life of existing elastomers. We manufacture all Neoprene sponge strip and EPDM sponge strip to any size required. All shapes and sizes of rubber gaskets are manufactured.

Author Bio

Clifton Rubber has been an ace provider when it comes to manufacture and marketing of rubber products such as rubber extrusions, rubber rings, rubber gaskets, precision engineering, cnc milling and machining, anti-vibration mounts etc.