Ws-cac-3000w & Ws-cac-6000w

By Author: Alex Rist
Total Articles: 54
Comment this article

6000 watt Power supply for Cisco Catalyst 6500-Series chassis. Both inputs
are high line (220 VAC nominal voltage), if the output is 6000W. When both
inputs are active, but at least one to the low line (110 VAC nominal voltage) or
a single input is active and operates from a high(220 VAC nominal voltage)
source, the module is prone to give 2900W output power. 3000 W AC power supply
supported on the Cisco Catalyst 6500-series: Catalyst 6506, Catalyst 6506-E,
Catalyst 6509, Catalyst 6509-E Catalyst 6509-Neb, Catalyst 6509 - Neb-A Catalyst
6509-VE, Catalyst 6513, Catalyst 6513-E. 3000-W from the power form factor
identical to the 1000 W 1300 W 2500 W 4000 W and 6000 W AC power supply inputs.

All Cisco Catalyst 6500 Series chassis with room for two load balancing, fault
tolerance, power supplies, hot swappable. Only one is required to work for a
heavily loaded chassis. If a second font is installed, it operates in a shared
capacity. The power supplies are hot swappable, a faulty power supply can be
removed without powering down the system. ...
... The 6000W power supply offers the
following features: universal input (100-240 VAC, 50-60 Hz), with all power in
the Cisco Catalyst 6506-E, Catalyst 6509-E and Cisco Catalyst 6513. Works on the
Catalyst 6506 and Catalyst 6509 with an output of 4000W magnitude. Hot
expendable and interchangeable.

The actual 3-slot chassis (number 6503-E)
provides improved adhesion of the Cisco Catalyst 67xx series line cards. The
actual 6- and 9 slot chassis (part numbers 6506-E and E-6509) provides
enhancements that improve all things considered adeptness supply system peak
power over Ethernet (PoE) scalability and port density . Continuing with the
Cisco Catalyst 6500 tradition of champion of investment insurance, all existing
supervisors, line cards, switch fabrics, and even software versions are
compatible with the E Series chassis.

The current structure of
Cisco systems
WS-CAC-3000W power supply and

Cisco systems
WS-CAC-6000W power supply is matched to the current 3 -, 6 - and 9 - the
beginning of a full member of all existing supervisors, line cards, switch
fabric, and even at its peak. The current structure is again in keeping all the
versions of software on-time release are on hand for the actual bearing, such as
real power. 3-slot chassis supports line cards CEF720, such as WS-6704-10GE,
WS-6724-SFP and WS-6748-SFP. 6 - and 9-slot chassis are blueprinted scale above
4000W power supply configurations. The moment you are on the accession of 6000W
of power. Least power required is 2500W or higher (AC or DC) for 6 - and 9-slot
chassis.
For more info please visit baynetwork.com