Stamped Concrete Overlays: Choices Of Texture, Patterns And Designs

By Author: concretecoating
Total Articles: 3
Comment this article

Stamped concrete is a great option for anyone who wants to revive their concrete slabs from boring to beautiful. There are two different steps which can be taken to ensure that this process is complete. The first option is removing the concrete you already have and when you re-pour the concrete you press a stamped pattern into it. The second option is merely an overlay atop the concrete slabs you have without having to remove the concrete.

The first option is perfect for anyone who is facing major imperfections in their concrete such as large cracks or breaks. If you are only facing a boring color or design, then the second is perfect. The second option requires less money and labor to complete and can be applied to indoor or outdoor concrete. Stamped concrete overlays let you transform concrete into a wood, brick, tile, slate, or flagstone look-alike. This design is perfect for patios, entryways, courtyards, pool decks, basement floors, or garage floors.

Stamped concrete overlays use polymer resins with cement, sand, and other performance-improving additives to increase the quality and wear resistance. You can ...
... apply layers are thin as a credit card or you can add many layers for multiple effects used at one. Stamped concrete overlays let you enjoy additional bond strength as well as a heightened resistance to UV. If you need to remove the entire concrete section, you can still utilize great stamped concrete overlay options like acid-etching staining, the appearance of natural materials, or an exposed aggregate finish.

You can select staining, coloring, and application patterns. You can use a floor coating with your stamped concrete overlay to provide a water-like shine. You can get paint that is multi-colored with paint chips in it, or colors in red, light blues, tans, browns, or light greens. If you utilize multi-colored flecks, you can create a stamped concrete overlay that looks like acrylic paint. Stamped overlays are etched into the ground first in a square or diagonal pattern. However, depending on the desired effect, you might cut the pattern after the staining because stains will penetrate differently around different indentations. If you want the color of a stamped overlay to change based on the pattern line then you should cut the pattern line before staining so that it forms a barrier which blocks the movement of the stain. If you are going to grout the sawed joints, then you need to stain and seal before you grout so that you can prevent accumulation of grout on the unprotected stain.

Once you select the pattern lines, they should be laid out with chalk or a pencil. You can create dramatic effects with a stamped concrete overlay with plastic materials that stick to the surface of the floor. Tiles can even be integrated into the stamped overlay to create an additional effect.

For more information visit here http://www.concretecoatingspecialists.com/