Cable Spraying - Cable Fire Protection Australia

By Author: KBSCoatings
Total Articles: 16
Comment this article

Cable Fireproofing by spray is done in the conventional way by spraying crosswise. Cable Coating through Fireproofing Spray cover the color of the cable jacket. In this coating wet thickness of the coating must be at least 2.5 mm on all exposed sides. Moreover, if you want at hard to- get- at places then an extension nozzle use is advised. In case when cables are close to a wall then stuff mineral wool between cables and wall will be coat over. Further, needed thickness may be applied in one coat.
KBS Fireproof Spray coating may be applied with a great variety of spray equipment; however, good results can be obtained with the following:
Airless spray equipment:
- Graco Ultra 1500 Mark V
- Pressure at gun: 0-200 bar
- Spray gun orfice: 0.9-1.0
Conventional spray equipment:
With pressure pot - Binks, De Vilibis Mastic, Wally or STA
Material pressure: 4-5 bar
Pressure at gub: 4 bar
Spray gun orifice: minimum 3 mm diameter
Material hose: minimum 3/4 diameter
...
... In the next step we should take a look for material used for fireproofing spray and it's important to do diligent research before choosing a brand OR a provider. Usually, spray applied fireproofing is cost effective so it is accepted by large amount of user. Further, in these days spray on Cementations Fireproofing is becoming one of the most common materials to use as it is cheap, efficient and easy to apply.
Moreover, different building materials of fireproofing spray won't all respond alike to the same type of Fireproofing. So, it is very important when doing your research to make sure that you learn what brand/type of fireproofing material will work best for your structure.
Features:
- Water-based: To offers easy installation and cleanup.
- Thixotropi: To provide easy installation as well as cleanup.
- Auto bonding and Flexible
- No solvents and No asbestos so safe.
- Non-halogenated and Weather Resistant
- Low Abrasion: To offer longer pump life with less maintenance.
- Factory Mutual tested as well as approved.
So, if you are looking for any cost effective cable Fireproofing then Cable Spraying is the great.
Author Bio:
Robertson Coatings has been established in 2004. It is a diversified company specialized in offer commercial, Fire Proof Paint, Fireproofing for Steel, fire paints, Fireproofing, intumescent coating, Fireproofing Spray, KBS Coating, maintenance painting and many more. For more information about services as well as diverse products please do visit: http://www.robertsoncoatings.com.au