If Your Home Is In Need Of A Facelift, Try Tuckpointing

By Author: vikram Kuamr
Total Articles: 2912
Comment this article

Buildings, like people, will show their age over time. And in a house, one of the first places that you will see this is in the brick and mortar, as well as the fittings around the doors and windows. This is why tuckpointing and lintel replacement is very important. Walls are more than merely boundaries and load bearing walls. They form a vital part of the facade of the house. But good looks are not the only reason to find a contractor to perform either lintel replacement or tuckpointing.

Basically, tuckpointing is when the mortar between bricks is replaced. The mortar will crack due to changes in temperature as well as problems with the bricks or the mortar itself. As brick and mortar gets older, they begin to degrade; this is a natural consequence of an aging wall. This is from a variety of problems, but regardless of the origin, it can cause a great many problems for the homeowner. Lintel replacement, a closely related procedure, can also deal with cracks, but these are the ones that occur around doors and windows. Both procedures are vital to maintaining your house.

Tuckpointing and lintel replacement will ...
... give any building a stronger structure. As we have said, these cracks appear for a variety of reasons, but they will all lead to the weakening of the wall. Some cases can lead to the wall falling down or having to be replaced totally. But before this extremity happens, a good dose of Tuckpointing will strengthen the wall, and lintel replacement will not only keep the house free from drafts and it will prevent cracks from starting at a door or window.

The settling of a house, or improperly installed masonry or simple age can be the reasons that mortar will break down. Of course, the cracks will start out very small but they will quickly grow until they form an unsightly problem. Do not make the mistake that these are merely cosmetic procedures. This type of work will maintain a house for many years and is very necessary when the crazing appears. Crazing is when there is not a single large crack, but a series of smaller interconnected ones. The problem with these, setting aside aesthetics for a moment, is that they can connect and grow into even bigger cracks. Tuckpointing is a simple way to deal with this problem.
What will happen is that a contractor to will come to your home, and scrape away about 1/4 inch of the mortar that has been affected by the cracks. They will then push in new mortar into the new space. It will fill the cracks and strengthen the entire wall. Technically, lintel replacement is a little different. Lintels are the pieces on top of the window or door frame, usually made out of a flat piece of metal. They will corrode and ware over the years. And the simplest way to deal with them is to replace them. This will help keep the house sealed against cold wind and keep the inside at an even temperature. If this problem is ignored, the lintels can pull away from the wall and begin more cracking there. The lintel should be inspected and replaced a great deal more frequently than the mortar. Sometimes, a house can go for decades without needing tuckpointing. Lintels have to be maintained on a tighter schedule.

Author Bio.

Bruno next generation construction has experience staffed who will able to assess and repair the damage on your house. They are ready to either perform tuckpointing or lintel replacement depending on your requirements.