Blast Cleaning And Preparation Of Tanks

By Author: Samuel Arthur
Total Articles: 340
Comment this article

If you wish to convert your underground are into a room for special purposes, you do need to first ensure that the area is thoroughly cleaned and water proofed. After enclosing the area and building a room over it, you will find it extremely difficult to handle the water seepage within the room. Hence you are required to undertake tanking preparation within that area and keep at bay any changes of water flowing and accumulating within it.

The most primary procedure which you can do is blast cleaning of the tank.
Blast cleaning involves cleaning of substrates which are found in basements and vaults. Blasting is undertaking to create a finished etch to the surface without damaging the substrate. By undertaking blasting you can ensure a good waterproofing system in place which will remove any excessive water and reduce the chances of damaging your property structure. When a blasting procedure is undertaken, the nozzle should not touch the substrate at any time for it is very likely that structure could be damaged due to the abrasion media and the air blast.

On the other hand, wherein you wish to tank an existing ...
... basement area you do need to check out the cavity drain membrane system. When this procedure is applied the water is not allowed to stay back in the basement instead spaces and outlets are so created that the water simply flows out. But for this tanking, surface preparation is done. The surface preparation involves the laying of a series of cavity drain membrane network through which the water is trapped in the walls can be guided to an exit point.

The cavity membrane drain system is acceptable as per British standards and hence can be safely carried out. Also, you do need to bear in mind that tanking preparation is best done by an expert the very first time. Hence, you should be extremely careful in choosing the right company to undertake the blast cleaning task for your tank. The blasting company should be able to offer you with a wet blast method in case you wish to avoid dust as well.

Tanking treatments can be done at two levels viz. externally as well as internally. The external tanking system is done at the outside of the structure in order to form a barrier which does not allow the water to penetrate into the structure. This treatment is essential when you are planning a new basement.

Do make it a point to research and located upon a reliable and experts blasting company which provides quality blast cleaning services for tanks at affordable rates. You could even check out their referrals and ensure your property and blast cleaning procedure is carried out be a reliable company. All in all, the blasting company should not only undertake blasting procedure but clean and sweep the area absolutely ready for tanking purposes.

For more information visit: http://www.blastitltd.co.uk