Battery Testing Laboratory: Complete Guide To Safety, Performance And Reliability

By Author: URS Labs
Total Articles: 55
Comment this article

A battery can look perfectly normal. Until, you discover some problems with charging whether its slow charging or charging discharge rapidly. Sometimes, it is really difficult to figure out whether only the battery is the problem or something else as problems come up through prolonged use of the battery to heat. For manufacturers, discovering battery related problems after a product launch can become expensive as the battery has already gone through safety, performance and reliability tests before reaching the customer's home.

What Does Battery Testing Cover?
Battery testing depends upon the battery chemistry, formation and its application. A household battery is different from an industrial battery. Their designs are different along with their sizes. So, while lab testing all the details related to battery is required and also the no. of samples used.
According to test plan, measurements that include capacity, discharge behaviour, internal resistance as well as charge resistance and its performance at ...
... every charging duration matters. Whereas, Performance testing examines how a cell or battery will work under defined conditions and this will help manufacturers to assess whether their product meets the required specifications of the product or not.
On the other hand, safety testing addresses a different problem like how the battery will behave when something goes wrong? Tests may examine its response to external short circuits, abnormal charging, temperature changes or mechanical stress and the exact tests criteria must come from the relevant standard rather than a general checklist.

The Right Requirements

No single battery test covers everything and every battery test requires a different approach whether it is a chemical test, or its application test. For example, IEC 62133-1 only addresses portable sealed rechargeable nickel cells and batteries.
Transport requirements also need separate attention. While traveling Lithium batteries need evidence relating to UN 38.3 and, alongside shipping documents and packaging arrangements. A transport test report should not be treated as proof that every product safety or performance requirement has been satisfied.

Samples and Documentation

Manufacturers should share the battery specifications, model identification, charging instructions, operating limits, before submitting it for testing. For packed batteries, information such as circuits and its management system can also be crucial.
Samples should represent the design that will actually be manufactured while holding the records of reviews. Changes to cells, protective components, connections or enclosure materials may affect whether earlier results remain applicable.

Choosing a Testing Laboratory

The laboratory should explain which methods will be performed, how samples will be handled and what the final report will contain. If accredited testing is required then businesses should check its relevant methods that should fall within the laboratory’s accreditation scope.
Batteries and cells testing provides evidence for practical decisions. It can support design development, supplier evaluation and compliance planning, while helping businesses identify weaknesses before they become customer complaints. Starting the process early gives manufacturers more time to improve the product and build a stronger basis for the claims made about its safety, capacity and expected performance.

URS Products and Testing Private Limited is a state of art testing facility in the Electrical and Electronics discipline, promoted by URS group, located in Noida. URS Lab has a testing facility embedded with Modern Technology for Automotive, Electronics, IT Products, Audio Video Products, Luminaries, and Electrical Home Appliances Products. For more information write to info@urs-labs.com